init

1 files changed, 86 insertions, 0 deletions

diff --git a/nut/iron/upsd.users b/nut/iron/upsd.users
new file mode 100644
index 0000000..30af253
--- /dev/null
+++ b/nut/iron/upsd.users
@@ -0,0 +1,86 @@
+[admin]
+    password = baller
+    actions = set
+    actions = fsd
+    instcmds = all
+    upsmon primary
+
+[observer]
+    password = 98072
+    upsmon secondary
+
+# Network UPS Tools: Example upsd.users
+#
+# This file sets the permissions for upsd - the UPS network daemon.
+# Users are defined here, are given passwords, and their privileges are
+# controlled here too.  Since this file will contain passwords, keep it
+# secure, with only enough permissions for upsd to read it.
+
+# --------------------------------------------------------------------------
+
+# Each user gets a section.  To start a section, put the username in
+# brackets on a line by itself.  To set something for that user, specify
+# it under that section heading.  The username is case-sensitive, so
+# admin and AdMiN are two different users.
+#
+# Possible settings:
+#
+# password: The user's password.  This is case-sensitive.
+#
+# --------------------------------------------------------------------------
+#
+# actions: Let the user do certain things with upsd.
+#
+# Valid actions are:
+#
+# SET   - change the value of certain variables in the UPS
+# FSD   - set the "forced shutdown" flag in the UPS
+#
+# --------------------------------------------------------------------------
+#
+# instcmds: Let the user initiate specific instant commands.  Use "ALL"
+# to grant all commands automatically.  There are many possible
+# commands, so use 'upscmd -l' to see what your hardware supports.  Here
+# are a few examples:
+#
+# test.panel.start      - Start a front panel test
+# test.battery.start    - Start battery test
+# test.battery.stop     - Stop battery test
+# calibrate.start       - Start calibration
+# calibrate.stop        - Stop calibration
+#
+# --------------------------------------------------------------------------
+#
+# Example:
+#
+#	[admin]
+#		password = mypass
+#		actions = SET
+#		instcmds = ALL
+#
+
+#
+# --- Configuring for a user who can execute tests only
+#
+#	[testuser]
+#		password  = pass
+#		instcmds  = test.battery.start
+#		instcmds  = test.battery.stop
+
+#
+# --- Configuring for upsmon
+#
+# To add a user for your upsmon, use this example:
+#
+#   [upsmon]
+#       password  = pass
+#       upsmon primary
+# or
+#       upsmon secondary
+#
+# The matching MONITOR line in your upsmon.conf would look like this:
+#
+# MONITOR myups@localhost 1 upsmon pass primary	(or secondary)
+#
+# See comments in the upsmon.conf(.sample) file for details about this
+# keyword and the difference of NUT secondary and primary systems.