diff options
Diffstat (limited to 'i3')
| -rw-r--r-- | i3/X395/i3/config | 268 | ||||
| -rw-r--r-- | i3/X395/i3/config.bak | 245 | ||||
| -rw-r--r-- | i3/X395/i3status/config | 63 | ||||
| -rw-r--r-- | i3/cobalt/i3/config | 278 | ||||
| -rw-r--r-- | i3/cobalt/i3status/config | 81 | ||||
| -rw-r--r-- | i3/lithium/i3/config | 281 | ||||
| -rw-r--r-- | i3/lithium/i3status/config | 77 | ||||
| -rwxr-xr-x | i3/macbookpro/i3/config | 252 | ||||
| -rwxr-xr-x | i3/macbookpro/i3status/config | 80 | ||||
| -rwxr-xr-x | i3/platinum/i3/config | 287 | ||||
| -rwxr-xr-x | i3/platinum/i3status/config | 94 | ||||
| -rwxr-xr-x | i3/titanium/i3/config | 255 | ||||
| -rwxr-xr-x | i3/titanium/i3status/config | 84 | ||||
| -rw-r--r-- | i3/tungsten/i3/config | 259 | ||||
| -rwxr-xr-x | i3/tungsten/i3status/config | 64 | ||||
| -rwxr-xr-x | i3/zinc/i3/config | 245 | ||||
| -rwxr-xr-x | i3/zinc/i3status/config | 69 |
17 files changed, 2982 insertions, 0 deletions
diff --git a/i3/X395/i3/config b/i3/X395/i3/config new file mode 100644 index 0000000..6e7be14 --- /dev/null +++ b/i3/X395/i3/config @@ -0,0 +1,268 @@ +# i3 config file (v4) +# +# Please see https://i3wm.org/docs/userguide.html for a complete reference! +# +# This config file uses keycodes (bindsym) and was written for the QWERTY +# layout. +# +# To get a config file with the same key positions, but for your current +# layout, use the i3-config-wizard +# + +# Font for window titles. Will also be used by the bar unless a different font +# is used in the bar {} block below. +font pango:CaskaydiaCoveNerdFontMono 12 + +# This font is widely installed, provides lots of unicode glyphs, right-to-left +# text rendering and scalability on retina/hidpi displays (thanks to pango). +#font pango:DejaVu Sans Mono 8 + +# Start XDG autostart .desktop files using dex. See also +# https://wiki.archlinux.org/index.php/XDG_Autostart +exec --no-startup-id dex --autostart --environment i3 + +# The combination of xss-lock, nm-applet and pactl is a popular choice, so +# they are included here as an example. Modify as you see fit. + +# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the +# screen before suspend. Use loginctl lock-session to lock your screen. +exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork + +# NetworkManager is the most popular way to manage wireless networks on Linux, +# and nm-applet is a desktop environment-independent system tray GUI for it. +exec --no-startup-id nm-applet + +# Use pactl to adjust volume in PulseAudio. +set $refresh_i3status killall -SIGUSR1 i3status +bindsym XF86AudioRaiseVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%+ && $refresh_i3status +bindsym XF86AudioLowerVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%- && $refresh_i3status +bindsym XF86AudioMute exec --no-startup-id wpctl set-mute @DEFAULT_SINK@ toggle && $refresh_i3status + +# brightness control +bindsym XF86MonBrightnessDown exec --no-startup-id brightnessctl --min-val=2 -q set 5%- +bindsym XF86MonBrightnessUp exec --no-startup-id brightnessctl -q set 5%+ + +# use these keys for focus, movement, and resize directions when reaching for +# the arrows is not convenient +set $up k +set $down j +set $left h +set $right l + +# use Mouse+Mod1 to drag floating windows to their wanted position +floating_modifier Mod1 + +# move tiling windows via drag & drop by left-clicking into the title bar, +# or left-clicking anywhere into the window while holding the floating modifier. +tiling_drag modifier titlebar + +# start a terminal +bindsym Mod1+Return exec --no-startup-id kitty + +# start browser +bindsym Mod1+Shift+Return exec --no-startup-id firefox-developer-edition + +# start spotify +bindsym Mod1+Ctrl+Shift+Return exec --no-startup-id spotify-launcher + +# start steam +bindsym Mod1+Shift+S exec --no-startup-id steam + +# kill focused window +bindsym Mod1+Shift+q kill + +# start dmenu (a program launcher) +bindsym Mod1+d exec --no-startup-id dmenu_run -fn CaskaydiaCoveNerdFontMono +# A more modern dmenu replacement is rofi: +# bindsym Mod1+d exec "rofi -modi drun,run -show drun" +# There also is i3-dmenu-desktop which only displays applications shipping a +# .desktop file. It is a wrapper around dmenu, so you need that installed. +# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop + +# change focus +bindsym Mod1+$left focus left +bindsym Mod1+$down focus down +bindsym Mod1+$up focus up +bindsym Mod1+$right focus right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Left focus left +bindsym Mod1+Down focus down +bindsym Mod1+Up focus up +bindsym Mod1+Right focus right + +# move focused window +bindsym Mod1+Shift+$left move left +bindsym Mod1+Shift+$down move down +bindsym Mod1+Shift+$up move up +bindsym Mod1+Shift+$right move right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Shift+Left move left +bindsym Mod1+Shift+Down move down +bindsym Mod1+Shift+Up move up +bindsym Mod1+Shift+Right move right + +# split in horizontal orientation +bindsym Mod1+b split h + +# split in vertical orientation +bindsym Mod1+v split v + +# enter fullscreen mode for the focused container +bindsym Mod1+f fullscreen toggle + +# change container layout (stacked, tabbed, toggle split) +bindsym Mod1+s layout stacking +bindsym Mod1+w layout tabbed +bindsym Mod1+e layout toggle split + +# toggle tiling / floating +bindsym Mod1+Shift+space floating toggle + +# change focus between tiling / floating windows +bindsym Mod1+space focus mode_toggle + +# focus the parent container +bindsym Mod1+a focus parent + +# focus the child container +#bindsym Mod1+d focus child + +# move the currently focused window to the scratchpad +bindsym Mod1+Shift+minus move scratchpad + +# Show the next scratchpad window or hide the focused scratchpad window. +# If there are multiple scratchpad windows, this command cycles through them. +bindsym Mod1+minus scratchpad show + +# Define names for default workspaces for which we configure key bindings later on. +# We use variables to avoid repeating the names in multiple places. +set $ws1 "1" +set $ws2 "2" +set $ws3 "3" +set $ws4 "4" +set $ws5 "5" +set $ws6 "6" +set $ws7 "7" +set $ws8 "8" +set $ws9 "9" +set $ws10 "10" + +# switch to workspace +bindsym Mod1+1 workspace number $ws1 +bindsym Mod1+2 workspace number $ws2 +bindsym Mod1+3 workspace number $ws3 +bindsym Mod1+4 workspace number $ws4 +bindsym Mod1+5 workspace number $ws5 +bindsym Mod1+6 workspace number $ws6 +bindsym Mod1+7 workspace number $ws7 +bindsym Mod1+8 workspace number $ws8 +bindsym Mod1+9 workspace number $ws9 +bindsym Mod1+0 workspace number $ws10 + +# move focused container to workspace +bindsym Mod1+Shift+1 move container to workspace number $ws1 +bindsym Mod1+Shift+2 move container to workspace number $ws2 +bindsym Mod1+Shift+3 move container to workspace number $ws3 +bindsym Mod1+Shift+4 move container to workspace number $ws4 +bindsym Mod1+Shift+5 move container to workspace number $ws5 +bindsym Mod1+Shift+6 move container to workspace number $ws6 +bindsym Mod1+Shift+7 move container to workspace number $ws7 +bindsym Mod1+Shift+8 move container to workspace number $ws8 +bindsym Mod1+Shift+9 move container to workspace number $ws9 +bindsym Mod1+Shift+0 move container to workspace number $ws10 + +# reload the configuration file +bindsym Mod1+Shift+c reload +# restart i3 inplace (preserves your layout/session, can be used to upgrade i3) +bindsym Mod1+Shift+r restart +# exit i3 (logs you out of your X session) +bindsym Mod1+Shift+e exec --no-startup-id "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'" + +# resize window (you can also use the mouse for that) +mode "resize" { + # These bindings trigger as soon as you enter the resize mode + + # Pressing left will shrink the window’s width. + # Pressing right will grow the window’s width. + # Pressing up will shrink the window’s height. + # Pressing down will grow the window’s height. + bindsym $left resize shrink width 10 px or 10 ppt + bindsym $down resize grow height 10 px or 10 ppt + bindsym $up resize shrink height 10 px or 10 ppt + bindsym $right resize grow width 10 px or 10 ppt + + # same bindings, but for the arrow keys + bindsym Left resize shrink width 10 px or 10 ppt + bindsym Down resize grow height 10 px or 10 ppt + bindsym Up resize shrink height 10 px or 10 ppt + bindsym Right resize grow width 10 px or 10 ppt + + # back to normal: Enter or Escape or Mod1+r + bindsym Return mode "default" + bindsym Escape mode "default" + bindsym Mod1+r mode "default" +} + +bindsym Mod1+r mode "resize" + +# Start i3bar to display a workspace bar (plus the system information i3status +# finds out, if available) +bar { + status_command i3status + tray_output primary + position top +} + +exec --no-startup-id xsetroot -solid "#222222" +exec --no-startup-id xset r rate 200 35 +exec --no-startup-id redshift +exec --no-startup-id easyeffects --gapplication-service +exec --no-startup-id solaar --window=hide + +# window borders +default_border pixel 5 +smart_borders on + +## triple monitor config + +# exec --no-startup-id xrandr --output HDMI-0 --rotate left +# exec --no-startup-id xrandr --output DP-5 --rotate left +# exec --no-startup-id xrandr --output DP-5 --right-of DP-2 +# exec --no-startup-id xrandr --output HDMI-0 --left-of DP-2 + +## none of that worked; script it is +exec --no-startup-id /home/nik/.scripts/startup.sh + +workspace 1 output DP-2 +workspace 2 output HDMI-0 +workspace 3 output DP-5 + +## open apps on workspaces + +set $Locker i3lock && sleep 1 + +# power controls + +set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown +mode "$mode_system" { + bindsym l exec --no-startup-id $Locker, mode "default" + bindsym e exec --no-startup-id i3-msg exit, mode "default" + bindsym s exec --no-startup-id $Locker && systemctl suspend, mode "default" + bindsym h exec --no-startup-id $Locker && systemctl hibernate, mode "default" + bindsym r exec --no-startup-id systemctl reboot, mode "default" + bindsym Shift+s exec --no-startup-id systemctl poweroff -i, mode "default" + + # back to normal: Enter or Escape + bindsym Return mode "default" + bindsym Escape mode "default" +} + +bindsym Mod1+End mode "$mode_system" + +# keyboard media controls +bindsym XF86AudioPlay exec --no-startup-id playerctl play-pause +bindsym XF86AudioPause exec --no-startup-id playerctl play-pause +bindsym XF86AudioNext exec --no-startup-id playerctl next +bindsym XF86AudioPrev exec --no-startup-i dplayerctl previous diff --git a/i3/X395/i3/config.bak b/i3/X395/i3/config.bak new file mode 100644 index 0000000..f6c8449 --- /dev/null +++ b/i3/X395/i3/config.bak @@ -0,0 +1,245 @@ +# i3 config file (v4) +# +# Please see https://i3wm.org/docs/userguide.html for a complete reference! +# +# This config file uses keycodes (bindsym) and was written for the QWERTY +# layout. +# +# To get a config file with the same key positions, but for your current +# layout, use the i3-config-wizard +# + +# Font for window titles. Will also be used by the bar unless a different font +# is used in the bar {} block below. +font pango:CaskaydiaCoveNerdFontMono 12 + +# This font is widely installed, provides lots of unicode glyphs, right-to-left +# text rendering and scalability on retina/hidpi displays (thanks to pango). +#font pango:DejaVu Sans Mono 8 + +# Start XDG autostart .desktop files using dex. See also +# https://wiki.archlinux.org/index.php/XDG_Autostart +exec --no-startup-id dex --autostart --environment i3 + +# The combination of xss-lock, nm-applet and pactl is a popular choice, so +# they are included here as an example. Modify as you see fit. + +# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the +# screen before suspend. Use loginctl lock-session to lock your screen. +exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork + +# NetworkManager is the most popular way to manage wireless networks on Linux, +# and nm-applet is a desktop environment-independent system tray GUI for it. +exec --no-startup-id nm-applet + +# Use pactl to adjust volume in PulseAudio. +set $refresh_i3status killall -SIGUSR1 i3status +bindsym XF86AudioRaiseVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%+ && $refresh_i3status +bindsym XF86AudioLowerVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%- && $refresh_i3status +bindsym XF86AudioMute exec --no-startup-id wpctl set-mute @DEFAULT_SINK@ toggle && $refresh_i3status + +# use these keys for focus, movement, and resize directions when reaching for +# the arrows is not convenient +set $up k +set $down j +set $left h +set $right l + +# use Mouse+Mod1 to drag floating windows to their wanted position +floating_modifier Mod1 + +# move tiling windows via drag & drop by left-clicking into the title bar, +# or left-clicking anywhere into the window while holding the floating modifier. +tiling_drag modifier titlebar + +# start a terminal +bindsym Mod1+Return exec --no-startup-id kitty + +# kill focused window +bindsym Mod1+Shift+q kill + +# start dmenu (a program launcher) +bindsym Mod1+d exec --no-startup-id dmenu_run -fn CaskaydiaCoveNerdFontMono +# A more modern dmenu replacement is rofi: +# bindsym Mod1+d exec "rofi -modi drun,run -show drun" +# There also is i3-dmenu-desktop which only displays applications shipping a +# .desktop file. It is a wrapper around dmenu, so you need that installed. +# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop + +# change focus +bindsym Mod1+$left focus left +bindsym Mod1+$down focus down +bindsym Mod1+$up focus up +bindsym Mod1+$right focus right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Left focus left +bindsym Mod1+Down focus down +bindsym Mod1+Up focus up +bindsym Mod1+Right focus right + +# move focused window +bindsym Mod1+Shift+$left move left +bindsym Mod1+Shift+$down move down +bindsym Mod1+Shift+$up move up +bindsym Mod1+Shift+$right move right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Shift+Left move left +bindsym Mod1+Shift+Down move down +bindsym Mod1+Shift+Up move up +bindsym Mod1+Shift+Right move right + +# split in horizontal orientation +bindsym Mod1+b split h + +# split in vertical orientation +bindsym Mod1+v split v + +# enter fullscreen mode for the focused container +bindsym Mod1+f fullscreen toggle + +# change container layout (stacked, tabbed, toggle split) +bindsym Mod1+s layout stacking +bindsym Mod1+w layout tabbed +bindsym Mod1+e layout toggle split + +# toggle tiling / floating +bindsym Mod1+Shift+space floating toggle + +# change focus between tiling / floating windows +bindsym Mod1+space focus mode_toggle + +# focus the parent container +bindsym Mod1+a focus parent + +# focus the child container +#bindsym Mod1+d focus child + +# move the currently focused window to the scratchpad +bindsym Mod1+Shift+minus move scratchpad + +# Show the next scratchpad window or hide the focused scratchpad window. +# If there are multiple scratchpad windows, this command cycles through them. +bindsym Mod1+minus scratchpad show + +# Define names for default workspaces for which we configure key bindings later on. +# We use variables to avoid repeating the names in multiple places. +set $ws1 "1" +set $ws2 "2" +set $ws3 "3" +set $ws4 "4" +set $ws5 "5" +set $ws6 "6" +set $ws7 "7" +set $ws8 "8" +set $ws9 "9" +set $ws10 "10" + +# switch to workspace +bindsym Mod1+1 workspace number $ws1 +bindsym Mod1+2 workspace number $ws2 +bindsym Mod1+3 workspace number $ws3 +bindsym Mod1+4 workspace number $ws4 +bindsym Mod1+5 workspace number $ws5 +bindsym Mod1+6 workspace number $ws6 +bindsym Mod1+7 workspace number $ws7 +bindsym Mod1+8 workspace number $ws8 +bindsym Mod1+9 workspace number $ws9 +bindsym Mod1+0 workspace number $ws10 + +# move focused container to workspace +bindsym Mod1+Shift+1 move container to workspace number $ws1 +bindsym Mod1+Shift+2 move container to workspace number $ws2 +bindsym Mod1+Shift+3 move container to workspace number $ws3 +bindsym Mod1+Shift+4 move container to workspace number $ws4 +bindsym Mod1+Shift+5 move container to workspace number $ws5 +bindsym Mod1+Shift+6 move container to workspace number $ws6 +bindsym Mod1+Shift+7 move container to workspace number $ws7 +bindsym Mod1+Shift+8 move container to workspace number $ws8 +bindsym Mod1+Shift+9 move container to workspace number $ws9 +bindsym Mod1+Shift+0 move container to workspace number $ws10 + +# reload the configuration file +bindsym Mod1+Shift+c reload +# restart i3 inplace (preserves your layout/session, can be used to upgrade i3) +bindsym Mod1+Shift+r restart +# exit i3 (logs you out of your X session) +bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'" + +# resize window (you can also use the mouse for that) +mode "resize" { + # These bindings trigger as soon as you enter the resize mode + + # Pressing left will shrink the window’s width. + # Pressing right will grow the window’s width. + # Pressing up will shrink the window’s height. + # Pressing down will grow the window’s height. + bindsym $left resize shrink width 10 px or 10 ppt + bindsym $down resize grow height 10 px or 10 ppt + bindsym $up resize shrink height 10 px or 10 ppt + bindsym $right resize grow width 10 px or 10 ppt + + # same bindings, but for the arrow keys + bindsym Left resize shrink width 10 px or 10 ppt + bindsym Down resize grow height 10 px or 10 ppt + bindsym Up resize shrink height 10 px or 10 ppt + bindsym Right resize grow width 10 px or 10 ppt + + # back to normal: Enter or Escape or Mod1+r + bindsym Return mode "default" + bindsym Escape mode "default" + bindsym Mod1+r mode "default" +} + +bindsym Mod1+r mode "resize" + +# Start i3bar to display a workspace bar (plus the system information i3status +# finds out, if available) +bar { + status_command i3status + tray_output primary +} + +exec --no-startup-id xsetroot -solid "#222222" +exec --no-startup-id xset r rate 200 35 +exec --no-startup-id redshift +exec --no-startup-id easyeffects --gapplication-service +exec --no-startup-id solaar --window=hide +exec --no-startup-id /home/nik/.scripts/startup.sh + +bindsym XF86MonBrightnessDown exec --no-startup-id brightnessctl --min-val=2 -q set 5%- +bindsym XF86MonBrightnessUp exec --no-startup-id brightnessctl -q set 5%+ + +workspace 1 output DP-2 +workspace 2 output HDMI-0 +workspace 3 output DP-5 + +## open apps on workspaces + +set $Locker i3lock && sleep 1 + +# power controls + +set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown +mode "$mode_system" { + bindsym l exec --no-startup-id $Locker, mode "default" + bindsym e exec --no-startup-id i3-msg exit, mode "default" + bindsym s exec --no-startup-id $Locker && systemctl suspend, mode "default" + bindsym h exec --no-startup-id $Locker && systemctl hibernate, mode "default" + bindsym r exec --no-startup-id systemctl reboot, mode "default" + bindsym Shift+s exec --no-startup-id systemctl poweroff -i, mode "default" + + # back to normal: Enter or Escape + bindsym Return mode "default" + bindsym Escape mode "default" +} + +bindsym Mod1+End mode "$mode_system" + +# keyboard media controls +bindsym XF86AudioPlay exec playerctl play-pause +bindsym XF86AudioPause exec playerctl play-pause +bindsym XF86AudioNext exec playerctl next +bindsym XF86AudioPrev exec playerctl previous + diff --git a/i3/X395/i3status/config b/i3/X395/i3status/config new file mode 100644 index 0000000..28cd887 --- /dev/null +++ b/i3/X395/i3status/config @@ -0,0 +1,63 @@ +general { + colors = true + interval = 2 +} + +order += "volume master" +order += "wireless _first_" +order += "ethernet _first_" +order += "cpu_usage" +order += "cpu_temperature package" +order += "battery all" +order += "disk /home" +order += "memory" +order += "tztime local" + +volume master { + format = "vol: %volume" + format_muted = "muted (%volume)" + device = "default" + mixer = "Master" + mixer_idx = 0 +} +wireless _first_ { + format_up = "W: (%quality at %essid) %ip" + format_down = "W: down" +} + +ethernet _first_ { + format_up = "E: %ip (%speed)" + format_down = "E: down" +} + +battery all { + format = "%status %percentage %remaining" +} + +cpu_usage { + format = "CPU: %usage" +} + +cpu_temperature package { + format = "%degrees °C" + path = "/sys/devices/platform/thinkpad_hwmon/hwmon/hwmon4/temp1_input" +} + + +disk "/home" { + format = "%avail" +} + +load { + format = "%1min" +} + +memory { + format = "%used | %available" + threshold_degraded = "1G" + format_degraded = "MEMORY < %available" +} + +tztime local { + format = "%Y-%m-%d %H:%M:%S" +} diff --git a/i3/cobalt/i3/config b/i3/cobalt/i3/config new file mode 100644 index 0000000..d526325 --- /dev/null +++ b/i3/cobalt/i3/config @@ -0,0 +1,278 @@ +# i3 +# config file (v4) +# +# Please see https://i3wm.org/docs/userguide.html for a complete reference! +# +# This config file uses keycodes (bindsym) and was written for the QWERTY +# layout. +# +# To get a config file with the same key positions, but for your current +# layout, use the i3-config-wizard + +# Font for window titles. Will also be used by the bar unless a different font +# is used in the bar {} block below. +font pango:CaskaydiaCoveNerdFontMono 10 + +# This font is widely installed, provides lots of unicode glyphs, right-to-left +# text rendering and scalability on retina/hidpi displays (thanks to pango). +#font pango:DejaVu Sans Mono 8 + +# Start XDG autostart .desktop files using dex. See also +# https://wiki.archlinux.org/index.php/XDG_Autostart +exec --no-startup-id dex --autostart --environment i3 + +# The combination of xss-lock, nm-applet and pactl is a popular choice, so +# they are included here as an example. Modify as you see fit. + +# yea we need network manager here +# its not so bad... +exec --no-startup-id nm-applet + +# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the +# screen before suspend. Use loginctl lock-session to lock your screen. +exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork + +# NetworkManager is the most popular way to manage wireless networks on Linux, +# and nm-applet is a desktop environment-independent system tray GUI for it. +# exec --no-startup-id nm-applet + +# change volume with wpctl (wireplumber) +set $refresh_i3status killall -SIGUSR1 i3status +bindsym XF86AudioRaiseVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%+ && $refresh_i3status +bindsym XF86AudioLowerVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%- && $refresh_i3status +bindsym XF86AudioMute exec --no-startup-id wpctl set-mute @DEFAULT_SINK@ toggle && $refresh_i3status + +# keyboard media controls +bindsym XF86AudioPlay exec --no-startup-id playerctl play-pause +bindsym XF86AudioPause exec --no-startup-id playerctl play-pause +bindsym XF86AudioNext exec --no-startup-id playerctl next +bindsym XF86AudioPrev exec --no-startup-id playerctl previous +bindsym XF86AudioStop exec --no-startup-id playerctl stop + +# use these keys for focus, movement, and resize directions when reaching for +# the arrows is not convenient +set $up k +set $down j +set $left h +set $right l + +# use Mouse+Mod1 to drag floating windows to their wanted position +floating_modifier Mod1 + +# move tiling windows via drag & drop by left-clicking into the title bar, +# or left-clicking anywhere into the window while holding the floating modifier. +tiling_drag modifier titlebar + +# start commonly used apps +bindsym Mod1+x exec --no-startup-id xterm +bindsym Mod1+Shift+s exec --no-startup-id firefox +bindsym Mod1+Ctrl+Shift+s exec --no-startup-id spotify-launcher + +# kill focused window +bindsym Mod1+Shift+q kill + +# start dmenu (a program launcher) +#bindsym Mod1+d exec --no-startup-id dmenu_run -fn CaskaydiaCoveNerdFontMono +bindsym Mod1+Tab exec --no-startup-id rofi -show drun +# A more modern dmenu replacement is rofi: +# bindsym Mod1+d exec "rofi -modi drun,run -show drun" +# There also is i3-dmenu-desktop which only displays applications shipping a +# .desktop file. It is a wrapper around dmenu, so you need that installed. +# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop + +# change focus +bindsym Mod1+$left focus left +bindsym Mod1+$down focus down +bindsym Mod1+$up focus up +bindsym Mod1+$right focus right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Left focus left +bindsym Mod1+Down focus down +bindsym Mod1+Up focus up +bindsym Mod1+Right focus right + +# move focused window +bindsym Mod1+Shift+$left move left +bindsym Mod1+Shift+$down move down +bindsym Mod1+Shift+$up move up +bindsym Mod1+Shift+$right move right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Shift+Left move left +bindsym Mod1+Shift+Down move down +bindsym Mod1+Shift+Up move up +bindsym Mod1+Shift+Right move right + +# split in horizontal orientation +bindsym Mod1+b split h + +# split in vertical orientation +bindsym Mod1+v split v + +# enter fullscreen mode for the focused container +bindsym Mod1+f fullscreen toggle + +# full(X)screen +bindsym Mod1+Shift+f fullscreen toggle global + +# change container layout (stacked, tabbed, toggle split) +bindsym Mod1+s layout stacking +bindsym Mod1+w layout tabbed +bindsym Mod1+e layout toggle split + +# toggle tiling / floating +bindsym Mod1+Shift+space floating toggle + +# change focus between tiling / floating windows +bindsym Mod1+space focus mode_toggle + +# focus the parent container +bindsym Mod1+a focus parent + +# focus the child container +#bindsym Mod1+d focus child + +# move the currently focused window to the scratchpad +bindsym Mod1+Shift+minus move scratchpad + +# Show the next scratchpad window or hide the focused scratchpad window. +# If there are multiple scratchpad windows, this command cycles through them. +bindsym Mod1+minus scratchpad show + +# Define names for default workspaces for which we configure key bindings later on. +# We use variables to avoid repeating the names in multiple places. +set $ws1 "1" +set $ws2 "2" +set $ws3 "3" +set $ws4 "4" +set $ws5 "5" +set $ws6 "6" +set $ws7 "7" +set $ws8 "8" +set $ws9 "9" +set $ws10 "10" + +# switch to workspace +bindsym Mod1+1 workspace number $ws1 +bindsym Mod1+2 workspace number $ws2 +bindsym Mod1+3 workspace number $ws3 +bindsym Mod1+4 workspace number $ws4 +bindsym Mod1+5 workspace number $ws5 +bindsym Mod1+6 workspace number $ws6 +bindsym Mod1+7 workspace number $ws7 +bindsym Mod1+8 workspace number $ws8 +bindsym Mod1+9 workspace number $ws9 +bindsym Mod1+0 workspace number $ws10 + +# move focused container to workspace +bindsym Mod1+Shift+1 move container to workspace number $ws1 +bindsym Mod1+Shift+2 move container to workspace number $ws2 +bindsym Mod1+Shift+3 move container to workspace number $ws3 +bindsym Mod1+Shift+4 move container to workspace number $ws4 +bindsym Mod1+Shift+5 move container to workspace number $ws5 +bindsym Mod1+Shift+6 move container to workspace number $ws6 +bindsym Mod1+Shift+7 move container to workspace number $ws7 +bindsym Mod1+Shift+8 move container to workspace number $ws8 +bindsym Mod1+Shift+9 move container to workspace number $ws9 +bindsym Mod1+Shift+0 move container to workspace number $ws10 + +# reload the configuration file +bindsym Mod1+Shift+c reload +# restart i3 inplace (preserves your layout/session, can be used to upgrade i3) +bindsym Mod1+Shift+r restart +# exit i3 (logs you out of your X session) +bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'" + +# resize window (you can also use the mouse for that) +mode "resize" { + # These bindings trigger as soon as you enter the resize mode + + # Pressing left will shrink the window’s width. + # Pressing right will grow the window’s width. + # Pressing up will shrink the window’s height. + # Pressing down will grow the window’s height. + bindsym $left resize shrink width 10 px or 10 ppt + bindsym $down resize grow height 10 px or 10 ppt + bindsym $up resize shrink height 10 px or 10 ppt + bindsym $right resize grow width 10 px or 10 ppt + + # same bindings, but for the arrow keys + bindsym Left resize shrink width 10 px or 10 ppt + bindsym Down resize grow height 10 px or 10 ppt + bindsym Up resize shrink height 10 px or 10 ppt + bindsym Right resize grow width 10 px or 10 ppt + + # back to normal: Enter or Escape or Mod1+r + bindsym Return mode "default" + bindsym Escape mode "default" + bindsym Mod1+r mode "default" +} + +bindsym Mod1+r mode "resize" + +# Start i3bar to display a workspace bar (plus the system information i3status +# finds out, if available) +bar { + status_command i3status + tray_output primary + position top +} + +exec --no-startup-id xsetroot -solid "#222222" +exec_always --no-startup-id xset r rate 200 35 +exec --no-startup-id redshift +exec --no-startup-id easyeffects --gapplication-service +exec --no-startup-id solaar --window=hide +exec --no-startup-id indicator-sound-switcher + +# window borders +default_border pixel 4 +hide_edge_borders none +smart_borders on + +## triple monitor config + +# exec --no-startup-id xrandr --output HDMI-0 --rotate left +# exec --no-startup-id xrandr --output DP-5 --rotate left +# exec --no-startup-id xrandr --output DP-5 --right-of DP-2 +# exec --no-startup-id xrandr --output HDMI-0 --left-of DP-2 + +## none of that worked; script it is +exec --no-startup-id /home/nik/.scripts/startup.sh + +workspace 1 output DP-2 +workspace 2 output HDMI-0 +workspace 3 output DP-5 + +## open apps on workspaces + +set $Locker i3lock && sleep 1 + +# power controls + +set $mode_system System (l) lock, (e) logout, (s) suspend, (r) reboot, (Shift+s) shutdown +mode "$mode_system" { + bindsym l exec --no-startup-id $Locker, mode default + bindsym e exec --no-startup-id i3-msg exit, mode default + bindsym s exec --no-startup-id $Locker && systemctl suspend, mode default + bindsym r exec --no-startup-id systemctl reboot, mode default + bindsym Shift+s exec --no-startup-id systemctl poweroff -i, mode default + + # back to normal: Enter or Escape + bindsym Return mode default + bindsym Escape mode default +} + +bindsym Mod1+End mode "$mode_system" + +set $display_control display control: 4 -> 40Hz, 6 -> 60Hz + +mode "$display_control" { + bindsym Return mode "default" + bindsym Escape mode "default" + bindsym 4 exec --no-startup-id xrandr --output LVDS-1 --mode 1600x900 --rate 40, mode default + bindsym 6 exec --no-startup-id xrandr --output LVDS-1 --mode 1600x900 --rate 60, mode default +} + +bindsym Mod1+Shift+d mode "$display_control" diff --git a/i3/cobalt/i3status/config b/i3/cobalt/i3status/config new file mode 100644 index 0000000..d91b057 --- /dev/null +++ b/i3/cobalt/i3status/config @@ -0,0 +1,81 @@ +# i3status configuration file. +# see "man i3status" for documentation. + +# It is important that this file is edited as UTF-8. +# The following line should contain a sharp s: +# ß +# If the above line is not correctly displayed, fix your editor first! + +general { + colors = true + interval = 1 +} + +order += "volume master" +order += "ipv6" +order += "ethernet _first_" +order += "wireless wlan0" +order += "battery all" +order += "disk /" +order += "cpu_usage" +order += "cpu_temperature package" +order += "memory" +order += "tztime local" + +volume master { + format = "vol:%volume" + format_muted = "muted (%volume)" + device = "default" + mixer = "Master" + mixer_idx = 0 +} + +ipv6 { + format_up = "%ip" + format_down = "" +} + +ethernet _first_ { + format_up = "%interface: %ip" + # format_up = "%ip [%speed]" + format_down = "" +} + +wireless wlan0 { + #format_up = "W: (%quality at %essid, %bitrate / %frequency) %ip" + format_up = "%essid:%ip" + format_down = "" +} + +battery all { + #format = "%status %percentage %remaining (%emptytime %consumption)" + format = "%status %percentage %remaining %consumption" + integer_battery_capacity = true + #last_full_capacity = true +} + +disk "/" { + format = "%avail" + prefix_type = binary +} + +cpu_usage { + format = "CPU:%usage" +} + +cpu_temperature package { + format = "%degrees°C" + path = "/sys/devices/platform/coretemp.0/hwmon/hwmon*/temp1_input" + #path = "/sys/class/hwmon/hwmon9/temp1_input" + max_threshold = 90 +} + +memory { + format = "%used %percentage_used" + threshold_degraded = "1G" + format_degraded = "MEMORY < %available" +} + +tztime local { + format = "%m-%d-%Y %H:%M:%S" +} diff --git a/i3/lithium/i3/config b/i3/lithium/i3/config new file mode 100644 index 0000000..82b15f8 --- /dev/null +++ b/i3/lithium/i3/config @@ -0,0 +1,281 @@ +# i3 config file (v4) +# +# Please see https://i3wm.org/docs/userguide.html for a complete reference! + +# Font for window titles. Will also be used by the bar unless a different font +# is used in the bar {} block below. +font pango:CaskaydiaCoveNerdFontMono 10 + +# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the +# screen before suspend. Use loginctl lock-session to lock your screen. +exec --no-startup-id xset s 600 600 +exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork -c 222222 +#exec --no-startup-id xautolock -time 20 -locker "systemctl suspend" + +# volume control +set $refresh_i3status killall -SIGUSR1 i3status +bindsym XF86AudioRaiseVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%+ && $refresh_i3status +bindsym XF86AudioLowerVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%- && $refresh_i3status +bindsym XF86AudioMute exec --no-startup-id wpctl set-mute @DEFAULT_SINK@ toggle && $refresh_i3status + +# keyboard media controls +bindsym XF86AudioPlay exec --no-startup-id playerctl play-pause +bindsym XF86AudioPause exec --no-startup-id playerctl play-pause +bindsym XF86AudioStop exec --no-startup-id playerctl stop +bindsym XF86AudioNext exec --no-startup-id playerctl next +bindsym XF86AudioPrev exec --no-startup-id playerctl previous + +mode $mediacontrols { + bindsym h exec --no-startup-id playerctl previous + bindsym j exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%- && $refresh_i3status + bindsym k exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%+ && $refresh_i3status + bindsym l exec --no-startup-id playerctl next + bindsym p exec --no-startup-id playerctl play-pause + + bindsym Return mode default + bindsym Escape mode default +} + +set $mediacontrols "vim-like media controls" +bindsym Mod1+m mode $mediacontrols + +# use these keys for focus, movement, and resize directions when reaching for +# the arrows is not convenient +set $up k +set $down j +set $left h +set $right l + +# use Mouse+Mod1 to drag floating windows to their wanted position +floating_modifier Mod1 + +# move tiling windows via drag & drop by left-clicking into the title bar, +# or left-clicking anywhere into the window while holding the floating modifier. +#tiling_drag modifier titlebar + +# launch commonly used apps +bindsym Mod1+x exec --no-startup-id xterm +bindsym Mod1+Shift+s exec --no-startup-id firefox-developer-edition +bindsym Mod1+Shift+Ctrl+s exec --no-startup-id spotify-launcher +bindsym Mod1+g exec --no-startup-id gpu-screen-recorder-gtk + +# kill focused window +bindsym Mod1+Shift+q kill + +# start dmenu (a program launcher) +#bindsym Mod1+d exec --no-startup-id dmenu_run -fn CaskaydiaCoveNerdFontMono +bindsym Mod1+q exec --no-startup-id rofi -show drun +# A more modern dmenu replacement is rofi: +# bindsym Mod1+d exec "rofi -modi drun,run -show drun" +# There also is i3-dmenu-desktop which only displays applications shipping a +# .desktop file. It is a wrapper around dmenu, so you need that installed. +# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop + +# change focus +bindsym Mod1+$left focus left +bindsym Mod1+$down focus down +bindsym Mod1+$up focus up +bindsym Mod1+$right focus right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Left focus left +bindsym Mod1+Down focus down +bindsym Mod1+Up focus up +bindsym Mod1+Right focus right + +# move focused window +bindsym Mod1+Shift+$left move left +bindsym Mod1+Shift+$down move down +bindsym Mod1+Shift+$up move up +bindsym Mod1+Shift+$right move right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Shift+Left move left +bindsym Mod1+Shift+Down move down +bindsym Mod1+Shift+Up move up +bindsym Mod1+Shift+Right move right + +# split in horizontal orientation +bindsym Mod1+b split h + +# split in vertical orientation +bindsym Mod1+v split v + +# enter fullscreen mode for the focused container +bindsym Mod1+f fullscreen toggle + +# full(x.org)screen for focused container +bindsym Mod1+Shift+f fullscreen toggle global + +# change container layout (stacked, tabbed, toggle split) +bindsym Mod1+s layout stacking +bindsym Mod1+w layout tabbed +bindsym Mod1+e layout toggle split + +# toggle tiling / floating +bindsym Mod1+Shift+space floating toggle + +# change focus between tiling / floating windows +bindsym Mod1+space focus mode_toggle + +# focus the parent container +bindsym Mod1+a focus parent + +# focus the child container +#bindsym Mod1+d focus child + +# move the currently focused window to the scratchpad +bindsym Mod1+Shift+minus move scratchpad + +# Show the next scratchpad window or hide the focused scratchpad window. +# If there are multiple scratchpad windows, this command cycles through them. +bindsym Mod1+minus scratchpad show + +# Define names for default workspaces for which we configure key bindings later on. +# We use variables to avoid repeating the names in multiple places. +set $ws1 "1" +set $ws2 "2" +set $ws3 "3" +set $ws4 "4" +set $ws5 "5" +set $ws6 "6" +set $ws7 "7" +set $ws8 "8" +set $ws9 "9" +set $ws10 "10" +#set $wsMain "main" +#set $wsSide "side" +#set $wsGame "game" + +# switch to workspace +bindsym Mod1+1 workspace number $ws1 +bindsym Mod1+2 workspace number $ws2 +bindsym Mod1+3 workspace number $ws3 +bindsym Mod1+4 workspace number $ws4 +bindsym Mod1+5 workspace number $ws5 +bindsym Mod1+6 workspace number $ws6 +bindsym Mod1+7 workspace number $ws7 +bindsym Mod1+8 workspace number $ws8 +bindsym Mod1+9 workspace number $ws9 +bindsym Mod1+0 workspace number $ws10 +#bindsym Mod1+m workspace $wsMain +#bindsym Mod1+s workspace $wsSide +#bindsym Mod1+g workspace $wsGame + +# move focused container to workspace +bindsym Mod1+Shift+1 move container to workspace number $ws1 +bindsym Mod1+Shift+2 move container to workspace number $ws2 +bindsym Mod1+Shift+3 move container to workspace number $ws3 +bindsym Mod1+Shift+4 move container to workspace number $ws4 +bindsym Mod1+Shift+5 move container to workspace number $ws5 +bindsym Mod1+Shift+6 move container to workspace number $ws6 +bindsym Mod1+Shift+7 move container to workspace number $ws7 +bindsym Mod1+Shift+8 move container to workspace number $ws8 +bindsym Mod1+Shift+9 move container to workspace number $ws9 +bindsym Mod1+Shift+0 move container to workspace number $ws10 +#bindsym Mod1+Shift+m move container to workspace $wsMain +#bindsym Mod1+Shift+s move container to workspace $wsSide +#bindsym Mod1+Shift+g move container to workspace $wsGame + +# reload the configuration file +bindsym Mod1+Shift+c reload +# restart i3 inplace (preserves your layout/session, can be used to upgrade i3) +bindsym Mod1+Shift+r restart +# exit i3 (logs you out of your X session) +bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'" + +# resize window (you can also use the mouse for that) +mode "resize" { + # These bindings trigger as soon as you enter the resize mode + + # Pressing left will shrink the window’s width. + # Pressing right will grow the window’s width. + # Pressing up will shrink the window’s height. + # Pressing down will grow the window’s height. + bindsym $left resize shrink width 10 px or 10 ppt + bindsym $down resize grow height 10 px or 10 ppt + bindsym $up resize shrink height 10 px or 10 ppt + bindsym $right resize grow width 10 px or 10 ppt + + # same bindings, but for the arrow keys + bindsym Left resize shrink width 10 px or 10 ppt + bindsym Down resize grow height 10 px or 10 ppt + bindsym Up resize shrink height 10 px or 10 ppt + bindsym Right resize grow width 10 px or 10 ppt + + # back to normal: Enter or Escape or Mod1+r + bindsym Return mode default + bindsym Escape mode default + bindsym Mod1+r mode default +} + +bindsym Mod1+r mode "resize" + +set $displaycontrol display control: (O) -> on, (Shift+O) -> off + +mode "$displaycontrol" { + bindsym Shift+o exec --no-startup-id xrandr --output DP-4 --off , mode default + bindsym o exec --no-startup-id $initdisplays, mode default + bindsym Return mode default + bindsym Escape mode default +} + +bindsym Mod1+Shift+d mode "$displaycontrol" + +# Start i3bar to display a workspace bar (plus the system information i3status +# finds out, if available) +bar { + status_command i3status + tray_output primary + position top +} + +# stuff and things +exec --no-startup-id xsetroot -solid "#222222" +#exec --no-startup-id nitrogen --restore +#exec --no-startup-id gpu-screen-recorder-gtk +exec_always --no-startup-id xset r rate 150 40 +exec --no-startup-id redshift +exec --no-startup-id easyeffects --gapplication-service +exec --no-startup-id solaar --window=hide +bindsym Mod1+c exec --no-startup-id xdotool click --repeat 20 --delay 50 1 + +# set H100i AIO fan curve +exec_always --no-startup-id liquidctl initialize all && sleep 1 && liquidctl --match "Corsair Hydro H100i Platinum" set fan speed 20 20 24 35 28 40 30 60 32 85 40 100 + +# window borders +default_border pixel 4 +hide_edge_borders none +smart_borders on + +set $initdisplays xrandr --output DP-1 --primary --mode 3440x1440 --rate 100 + +exec --no-startup-id $initdisplays + +workspace $ws1 output DP-2 +workspace $ws2 output DP-2 +workspace $ws3 output DP-2 + +workspace $ws8 output DP-4 +workspace $ws9 output DP-4 +workspace $ws10 output DP-4 + +set $Locker i3lock -c 222222 && sleep 1 + +# power controls + +set $mode_system System (l) lock, (e) logout, (s) suspend, (r) reboot, (Shift+s) shutdown + +mode "$mode_system" { + bindsym l exec --no-startup-id $Locker, mode default + bindsym e exec --no-startup-id i3-msg exit, mode default + bindsym s exec --no-startup-id $Locker && systemctl suspend, mode default + bindsym r exec --no-startup-id systemctl reboot, mode default + bindsym Shift+s exec --no-startup-id systemctl poweroff -i, mode default + + # back to normal: Enter or Escape + bindsym Return mode default + bindsym Escape mode default +} + +bindsym Mod1+End mode "$mode_system" diff --git a/i3/lithium/i3status/config b/i3/lithium/i3status/config new file mode 100644 index 0000000..d9f330e --- /dev/null +++ b/i3/lithium/i3status/config @@ -0,0 +1,77 @@ +# i3status configuration file. +# see "man i3status" for documentation. + +# It is important that this file is edited as UTF-8. +# The following line should contain a sharp s: +# ß +# If the above line is not correctly displayed, fix your editor first! + +general { + colors = true + interval = 1 +} + +order += "volume master" +order += "ethernet _first_" +order += "ethernet eno2" +order += "ipv6" +order += "disk /" +order += "cpu_usage" +order += "cpu_temperature package" +order += "memory" +order += "tztime local" + +volume master { + format = "vol: %volume" + format_muted = "muted (%volume)" + device = "default" + mixer = "Master" + mixer_idx = 0 +} + +ipv6 { + format_up = "%ip" + format_down = "" +} + +ethernet _first_ { + format_up = "%interface: %ip" + #format_up = "%ip [%speed]" + format_down = "" +} + +ethernet eno2 { + format_up = "%interface: %ip" + #format_up = "%ip [%speed]" + format_down = "" +} + +battery all { + format = "%percentage" +} + +disk "/" { + format = "%avail" + prefix_type = binary +} + +cpu_usage { + format = "CPU: %usage" +} + +cpu_temperature package { + format = "%degrees °C" + path = "/sys/devices/platform/coretemp.0/hwmon/hwmon*/temp1_input" + #path = "/sys/class/hwmon/hwmon9/temp1_input" + max_threshold = 90 +} + +memory { + format = "%used | %available" + threshold_degraded = "1G" + format_degraded = "MEMORY < %available" +} + +tztime local { + format = "%m-%d-%Y %H:%M:%S" +} diff --git a/i3/macbookpro/i3/config b/i3/macbookpro/i3/config new file mode 100755 index 0000000..902b6b9 --- /dev/null +++ b/i3/macbookpro/i3/config @@ -0,0 +1,252 @@ +# i3 config file (v4) +# +# Please see https://i3wm.org/docs/userguide.html for a complete reference! +# +# This config file uses keycodes (bindsym) and was written for the QWERTY +# layout. +# +# To get a config file with the same key positions, but for your current +# layout, use the i3-config-wizard +# + +# Font for window titles. Will also be used by the bar unless a different font +# is used in the bar {} block below. + +font pango:CaskaydiaCoveNFM 12 + +# This font is widely installed, provides lots of unicode glyphs, right-to-left +# text rendering and scalability on retina/hidpi displays (thanks to pango). +#font pango:DejaVu Sans Mono 8 + +# Start XDG autostart .desktop files using dex. See also +# https://wiki.archlinux.org/index.php/XDG_Autostart +exec --no-startup-id dex --autostart --environment i3 + +# yea we use network manager here +exec --no-startup-id nm-applet + +# The combination of xss-lock, nm-applet and pactl is a popular choice, so +# they are included here as an example. Modify as you see fit. + +# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the +# screen before suspend. Use loginctl lock-session to lock your screen. +exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork -e + +# adjust volume with wpctl (wireplumber) +bindsym XF86AudioRaiseVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%+ && $refresh_i3status +bindsym XF86AudioLowerVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%- && $refresh_i3status +bindsym XF86AudioMute exec --no-startup-id wpctl set-mute @DEFAULT_SINK@ toggle && $refresh_i3status + +# keyboard media controls +bindsym XF86AudioPlay exec --no-startup-id playerctl play-pause +bindsym XF86AudioPause exec --no-startup-id playerctl play-pause +bindsym XF86AudioNext exec --no-startup-id playerctl next +bindsym XF86AudioPrev exec --no-startup-id playerctl previous +bindsym XF86AudioStop exec --no-startup-id playerctl stop + +# brightness controls +bindsym XF86MonBrightnessDown exec --no-startup-id brightnessctl set 1- +bindsym XF86MonBrightnessUp exec --no-startup-id brightnessctl set +1 + +# use these keys for focus, movement, and resize directions when reaching for +# the arrows is not convenient +set $up k +set $down j +set $left h +set $right l + +# use Mouse+Mod1 to drag floating windows to their wanted position +floating_modifier Mod1 + +# move tiling windows via drag & drop by left-clicking into the title bar, +# or left-clicking anywhere into the window while holding the floating modifier. +tiling_drag modifier titlebar + +# start a terminal +bindsym Mod1+Return exec --no-startup-id kitty + +# start a browser +bindsym Mod1+Shift+Return exec --no-startup-id firefox-developer-edition + +# start spotify +bindsym Mod1+Ctrl+Shift+Return exec --no-startup-id spotify-launcher + +# kill focused window +bindsym Mod1+Shift+q kill + +# start dmenu (a program launcher) +bindsym Mod1+d exec --no-startup-id dmenu_run -fn CaskaydiaCoveNerdFontMono +# A more modern dmenu replacement is rofi: +# bindsym Mod1+d exec "rofi -modi drun,run -show drun" +# There also is i3-dmenu-desktop which only displays applications shipping a +# .desktop file. It is a wrapper around dmenu, so you need that installed. +# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop + +# change focus +bindsym Mod1+$left focus left +bindsym Mod1+$down focus down +bindsym Mod1+$up focus up +bindsym Mod1+$right focus right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Left focus left +bindsym Mod1+Down focus down +bindsym Mod1+Up focus up +bindsym Mod1+Right focus right + +# move focused window +bindsym Mod1+Shift+$left move left +bindsym Mod1+Shift+$down move down +bindsym Mod1+Shift+$up move up +bindsym Mod1+Shift+$right move right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Shift+Left move left +bindsym Mod1+Shift+Down move down +bindsym Mod1+Shift+Up move up +bindsym Mod1+Shift+Right move right + +# split in horizontal orientation +bindsym Mod1+b split h + +# split in vertical orientation +bindsym Mod1+v split v + +# enter fullscreen mode for the focused container +bindsym Mod1+f fullscreen toggle + +# change container layout (stacked, tabbed, toggle split) +bindsym Mod1+s layout stacking +bindsym Mod1+w layout tabbed +bindsym Mod1+e layout toggle split + +# toggle tiling / floating +bindsym Mod1+Shift+space floating toggle + +# change focus between tiling / floating windows +bindsym Mod1+space focus mode_toggle + +# focus the parent container +bindsym Mod1+a focus parent + +# focus the child container +#bindsym Mod1+d focus child + +# move the currently focused window to the scratchpad +bindsym Mod1+Shift+minus move scratchpad + +# Show the next scratchpad window or hide the focused scratchpad window. +# If there are multiple scratchpad windows, this command cycles through them. +bindsym Mod1+minus scratchpad show + +# Define names for default workspaces for which we configure key bindings later on. +# We use variables to avoid repeating the names in multiple places. +set $ws1 "1" +set $ws2 "2" +set $ws3 "3" +set $ws4 "4" +set $ws5 "5" +set $ws6 "6" +set $ws7 "7" +set $ws8 "8" +set $ws9 "9" +set $ws10 "10" + +# switch to workspace +bindsym Mod1+1 workspace number $ws1 +bindsym Mod1+2 workspace number $ws2 +bindsym Mod1+3 workspace number $ws3 +bindsym Mod1+4 workspace number $ws4 +bindsym Mod1+5 workspace number $ws5 +bindsym Mod1+6 workspace number $ws6 +bindsym Mod1+7 workspace number $ws7 +bindsym Mod1+8 workspace number $ws8 +bindsym Mod1+9 workspace number $ws9 +bindsym Mod1+0 workspace number $ws10 + +# move focused container to workspace +bindsym Mod1+Shift+1 move container to workspace number $ws1 +bindsym Mod1+Shift+2 move container to workspace number $ws2 +bindsym Mod1+Shift+3 move container to workspace number $ws3 +bindsym Mod1+Shift+4 move container to workspace number $ws4 +bindsym Mod1+Shift+5 move container to workspace number $ws5 +bindsym Mod1+Shift+6 move container to workspace number $ws6 +bindsym Mod1+Shift+7 move container to workspace number $ws7 +bindsym Mod1+Shift+8 move container to workspace number $ws8 +bindsym Mod1+Shift+9 move container to workspace number $ws9 +bindsym Mod1+Shift+0 move container to workspace number $ws10 + +# reload the configuration file +bindsym Mod1+Shift+c reload +# restart i3 inplace (preserves your layout/session, can be used to upgrade i3) +bindsym Mod1+Shift+r restart +# exit i3 (logs you out of your X session) +bindsym Mod1+Shift+e exec --no-startup-id "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'" + +# resize window (you can also use the mouse for that) +mode "resize" { + # These bindings trigger as soon as you enter the resize mode + + # Pressing left will shrink the window’s width. + # Pressing right will grow the window’s width. + # Pressing up will shrink the window’s height. + # Pressing down will grow the window’s height. + bindsym $left resize shrink width 10 px or 10 ppt + bindsym $down resize grow height 10 px or 10 ppt + bindsym $up resize shrink height 10 px or 10 ppt + bindsym $right resize grow width 10 px or 10 ppt + + # same bindings, but for the arrow keys + bindsym Left resize shrink width 10 px or 10 ppt + bindsym Down resize grow height 10 px or 10 ppt + bindsym Up resize shrink height 10 px or 10 ppt + bindsym Right resize grow width 10 px or 10 ppt + + # back to normal: Enter or Escape or Mod1+r + bindsym Return mode "default" + bindsym Escape mode "default" + bindsym Mod1+r mode "default" +} + +bindsym Mod1+r mode "resize" + +# Start i3bar to display a workspace bar (plus the system information i3status +# finds out, if available) +bar { + status_command i3status + position top +} + +# misc +exec --no-startup-id xsetroot -solid "#222222" +exec --no-startup-id xset r rate 200 35 +exec --no-startup-id easyeffects --gapplication-service +exec --no-startup-id redshift +exec --no-startup-id solaar --window=hide +# exec --no-startup-id fcitx + +## Screenshots +bindsym Print exec --no-startup-id maim "/home/$USER/pictures/$(date)" + +# window borders +default_border pixel 4 +smart_borders on + +set $Locker i3lock -e && sleep 1 + +# power controls: +set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown +mode "$mode_system" { + bindsym l exec --no-startup-id $Locker, mode "default" + bindsym e exec --no-startup-id i3-msg exit, mode "default" + bindsym s exec --no-startup-id $Locker && systemctl suspend, mode "default" + bindsym h exec --no-startup-id $Locker && systemctl hibernate, mode "default" + bindsym r exec --no-startup-id systemctl reboot, mode "default" + bindsym Shift+s exec --no-startup-id systemctl poweroff -i, mode "default" + + # back to normal: Enter or Escape + bindsym Return mode "default" + bindsym Escape mode "default" +} + +bindsym Mod1+p mode "$mode_system" diff --git a/i3/macbookpro/i3status/config b/i3/macbookpro/i3status/config new file mode 100755 index 0000000..be8710c --- /dev/null +++ b/i3/macbookpro/i3status/config @@ -0,0 +1,80 @@ +# i3status configuration file. +# see "man i3status" for documentation. + +# It is important that this file is edited as UTF-8. +# The following line should contain a sharp s: +# ß +# If the above line is not correctly displayed, fix your editor first! + +general { + colors = true + interval = 1 +} + +order += "volume master" +order += "ethernet _first_" +order += "wireless wlan0" +order += "cpu_usage" +order += "cpu_temperature package" +order += "battery all" +order += "disk /" +order += "memory" +order += "tztime local" + +volume master { + format = "vol:%volume" + format_muted = "muted (%volume)" + device = "default" +} + +battery all { + format = "%remaining" + format_down = "no battery" +} + +ethernet _first_ { + format_up = "%interface: %ip" + format_down = "eth down" +} + +wireless wlan0 { + format_up = "wlan0: %ip %frequency" + format_down = "wireless down" +} + +battery all { + format = "%status %percentage" + format_down = "no battery" +} + +ipv6 { + format_up = "IPv6: %ip" + format_down = "IPv6: down" +} +cpu_usage { + format = "CPU: %usage" + path = "/proc/stat" +} + +cpu_temperature package { + format = "%degrees °C" + path = "/sys/devices/platform/coretemp.0/hwmon/hwmon3/temp1_input" +} + +disk "/" { + format = "%avail" +} + +load { + format = "%1min" +} + +memory { + format = "%used | %available" + threshold_degraded = "1G" + format_degraded = "MEMORY < %available" +} + +tztime local { + format = "%m-%d-%Y %H:%M:%S" +} diff --git a/i3/platinum/i3/config b/i3/platinum/i3/config new file mode 100755 index 0000000..9915096 --- /dev/null +++ b/i3/platinum/i3/config @@ -0,0 +1,287 @@ +# i3 config file (v4) +# +# Please see https://i3wm.org/docs/userguide.html for a complete reference! + +# Font for window titles. Will also be used by the bar unless a different font +# is used in the bar {} block below. +font pango:CaskaydiaCoveNerdFontMono 12 + +# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the +# screen before suspend. Use loginctl lock-session to lock your screen. +exec --no-startup-id xset s 600 600 +exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork -c 222222 +#exec --no-startup-id xautolock -time 20 -locker "systemctl suspend" + +# volume control +set $refresh_i3status killall -SIGUSR1 i3status +bindsym XF86AudioRaiseVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%+ && $refresh_i3status +bindsym XF86AudioLowerVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%- && $refresh_i3status +bindsym XF86AudioMute exec --no-startup-id wpctl set-mute @DEFAULT_SINK@ toggle && $refresh_i3status + +# keyboard media controls +bindsym XF86AudioPlay exec --no-startup-id playerctl play-pause +bindsym XF86AudioPause exec --no-startup-id playerctl play-pause +bindsym XF86AudioStop exec --no-startup-id playerctl stop +bindsym XF86AudioNext exec --no-startup-id playerctl next +bindsym XF86AudioPrev exec --no-startup-id playerctl previous + +# brightness controls +bindsym XF86MonBrightnessDown exec --no-startup-id brightnessctl set 2- +bindsym XF86MonBrightnessUp exec --no-startup-id brightnessctl set 2+ + +mode $mediacontrols { + bindsym h exec --no-startup-id playerctl previous + bindsym j exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%- && $refresh_i3status + bindsym k exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%+ && $refresh_i3status + bindsym m exec --no-startup-id wpctl set-mute @DEFAULT_SINK@ toggle && $refresh_i3status + bindsym l exec --no-startup-id playerctl next + bindsym p exec --no-startup-id playerctl play-pause + + bindsym Return mode default + bindsym Escape mode default +} + +set $mediacontrols "vim-like media controls" +bindsym Mod4+m mode $mediacontrols + +# use these keys for focus, movement, and resize directions when reaching for +# the arrows is not convenient +set $up k +set $down j +set $left h +set $right l + +# use Mouse+Mod4 to drag floating windows to their wanted position +floating_modifier Mod4 + +# move tiling windows via drag & drop by left-clicking into the title bar, +# or left-clicking anywhere into the window while holding the floating modifier. +#tiling_drag modifier titlebar + +# launch commonly used apps +bindsym Mod4+x exec --no-startup-id xterm +bindsym Mod4+Shift+s exec --no-startup-id firefox +bindsym Mod4+Shift+Ctrl+s exec --no-startup-id spotify-launcher +bindsym Mod4+g exec --no-startup-id gpu-screen-recorder-gtk + +# kill focused window +bindsym Mod4+Shift+q kill + +# start dmenu (a program launcher) +#bindsym Mod4+d exec --no-startup-id dmenu_run -fn CaskaydiaCoveNerdFontMono +bindsym Mod4+Tab exec --no-startup-id rofi -show drun +# A more modern dmenu replacement is rofi: +# bindsym Mod4+d exec "rofi -modi drun,run -show drun" +# There also is i3-dmenu-desktop which only displays applications shipping a +# .desktop file. It is a wrapper around dmenu, so you need that installed. +# bindsym Mod4+d exec --no-startup-id i3-dmenu-desktop + +# change focus +bindsym Mod4+$left focus left +bindsym Mod4+$down focus down +bindsym Mod4+$up focus up +bindsym Mod4+$right focus right + +# alternatively, you can use the cursor keys: +bindsym Mod4+Left focus left +bindsym Mod4+Down focus down +bindsym Mod4+Up focus up +bindsym Mod4+Right focus right + +# move focused window +bindsym Mod4+Shift+$left move left +bindsym Mod4+Shift+$down move down +bindsym Mod4+Shift+$up move up +bindsym Mod4+Shift+$right move right + +# alternatively, you can use the cursor keys: +bindsym Mod4+Shift+Left move left +bindsym Mod4+Shift+Down move down +bindsym Mod4+Shift+Up move up +bindsym Mod4+Shift+Right move right + +# split in horizontal orientation +bindsym Mod4+b split h + +# split in vertical orientation +bindsym Mod4+v split v + +# enter fullscreen mode for the focused container +bindsym Mod4+f fullscreen toggle + +# full(x.org)screen for focused container +bindsym Mod4+Shift+f fullscreen toggle global + +# change container layout (stacked, tabbed, toggle split) +bindsym Mod4+s layout stacking +bindsym Mod4+w layout tabbed +bindsym Mod4+e layout toggle split + +# toggle tiling / floating +bindsym Mod4+Shift+space floating toggle + +# change focus between tiling / floating windows +bindsym Mod4+space focus mode_toggle + +# focus the parent container +bindsym Mod4+a focus parent + +# focus the child container +#bindsym Mod4+d focus child + +# move the currently focused window to the scratchpad +bindsym Mod4+Shift+minus move scratchpad + +# Show the next scratchpad window or hide the focused scratchpad window. +# If there are multiple scratchpad windows, this command cycles through them. +bindsym Mod4+minus scratchpad show + +# Define names for default workspaces for which we configure key bindings later on. +# We use variables to avoid repeating the names in multiple places. +set $ws1 "1" +set $ws2 "2" +set $ws3 "3" +set $ws4 "4" +set $ws5 "5" +set $ws6 "6" +set $ws7 "7" +set $ws8 "8" +set $ws9 "9" +set $ws10 "10" +#set $wsMain "main" +#set $wsSide "side" +#set $wsGame "game" + +# switch to workspace +bindsym Mod4+1 workspace number $ws1 +bindsym Mod4+2 workspace number $ws2 +bindsym Mod4+3 workspace number $ws3 +bindsym Mod4+4 workspace number $ws4 +bindsym Mod4+5 workspace number $ws5 +bindsym Mod4+6 workspace number $ws6 +bindsym Mod4+7 workspace number $ws7 +bindsym Mod4+8 workspace number $ws8 +bindsym Mod4+9 workspace number $ws9 +bindsym Mod4+0 workspace number $ws10 +#bindsym Mod4+m workspace $wsMain +#bindsym Mod4+s workspace $wsSide +#bindsym Mod4+g workspace $wsGame + +# move focused container to workspace +bindsym Mod4+Shift+1 move container to workspace number $ws1 +bindsym Mod4+Shift+2 move container to workspace number $ws2 +bindsym Mod4+Shift+3 move container to workspace number $ws3 +bindsym Mod4+Shift+4 move container to workspace number $ws4 +bindsym Mod4+Shift+5 move container to workspace number $ws5 +bindsym Mod4+Shift+6 move container to workspace number $ws6 +bindsym Mod4+Shift+7 move container to workspace number $ws7 +bindsym Mod4+Shift+8 move container to workspace number $ws8 +bindsym Mod4+Shift+9 move container to workspace number $ws9 +bindsym Mod4+Shift+0 move container to workspace number $ws10 +#bindsym Mod4+Shift+m move container to workspace $wsMain +#bindsym Mod4+Shift+s move container to workspace $wsSide +#bindsym Mod4+Shift+g move container to workspace $wsGame + +# reload the configuration file +bindsym Mod4+Shift+c reload +# restart i3 inplace (preserves your layout/session, can be used to upgrade i3) +bindsym Mod4+Shift+r restart +# exit i3 (logs you out of your X session) +bindsym Mod4+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'" + +# resize window (you can also use the mouse for that) +mode "resize" { + # These bindings trigger as soon as you enter the resize mode + + # Pressing left will shrink the window’s width. + # Pressing right will grow the window’s width. + # Pressing up will shrink the window’s height. + # Pressing down will grow the window’s height. + bindsym $left resize shrink width 10 px or 10 ppt + bindsym $down resize grow height 10 px or 10 ppt + bindsym $up resize shrink height 10 px or 10 ppt + bindsym $right resize grow width 10 px or 10 ppt + + # same bindings, but for the arrow keys + bindsym Left resize shrink width 10 px or 10 ppt + bindsym Down resize grow height 10 px or 10 ppt + bindsym Up resize shrink height 10 px or 10 ppt + bindsym Right resize grow width 10 px or 10 ppt + + # back to normal: Enter or Escape or Mod4+r + bindsym Return mode default + bindsym Escape mode default + bindsym Mod4+r mode default +} + +bindsym Mod4+r mode "resize" + + +set $165Hz xrandr --output eDP --mode 2560x1600 --rate 165 --primary +set $60Hz xrandr --output eDP --mode 2560x1600 --rate 60 --primary + +#after using Hyprland, i3 would only update with mouse movement. resetting the display fixes it, somehow. +#exec --no-startup-id $60Hz +exec --no-startup-id $165Hz + +set $displaycontrol display control: (1) -> 165Hz, (6) -> 60Hz + +mode "$displaycontrol" { + bindsym 6 exec --no-startup-id $60Hz, mode default + bindsym 1 exec --no-startup-id $165Hz, mode default + bindsym Return mode default + bindsym Escape mode default +} + +bindsym Mod4+Shift+d mode "$displaycontrol" + +# Start i3bar to display a workspace bar (plus the system information i3status +# finds out, if available) +bar { + status_command i3status + tray_output primary + position top +} + +# stuff and things +exec --no-startup-id xsetroot -solid "#222222" +exec_always --no-startup-id xset r rate 150 40 +exec --no-startup-id redshift-gtk +exec --no-startup-id easyeffects --gapplication-service +exec --no-startup-id solaar --window=hide +exec --no-startup-id nm-applet +exec --no-startup-id feh --bg-fill ~/.images/pastel.jpg +exec --no-startup-id picom +bindsym Mod4+c exec --no-startup-id xdotool click --repeat 20 --delay 50 1 + +## Screenshots +bindsym Print exec --no-startup-id maim "/home/$USER/pictures/$(date)" + +# window borders +default_border pixel 4 +hide_edge_borders none +#smart_borders on + +# window gaps +gaps inner 16 +gaps outer 8 + +set $Locker i3lock -c 222222 && sleep 1 + +# power controls + +set $mode_system System (l) lock, (e) logout, (s) suspend, (r) reboot, (Shift+s) shutdown + +mode "$mode_system" { + bindsym l exec --no-startup-id $Locker, mode default + bindsym e exec --no-startup-id i3-msg exit, mode default + bindsym s exec --no-startup-id $Locker && systemctl suspend, mode default + bindsym r exec --no-startup-id systemctl reboot, mode default + bindsym Shift+s exec --no-startup-id systemctl poweroff -i, mode default + + # back to normal: Enter or Escape + bindsym Return mode default + bindsym Escape mode default +} + +bindsym Mod4+p mode "$mode_system" diff --git a/i3/platinum/i3status/config b/i3/platinum/i3status/config new file mode 100755 index 0000000..739d544 --- /dev/null +++ b/i3/platinum/i3status/config @@ -0,0 +1,94 @@ +# i3status configuration file. +# see "man i3status" for documentation. + +# It is important that this file is edited as UTF-8. +# The following line should contain a sharp s: +# ß +# If the above line is not correctly displayed, fix your editor first! + +general { + colors = true + interval = 1 +} + +order += "volume master" +order += "ethernet _first_" +order += "ethernet wg0" +order += "wireless wlp1s0" +order += "ipv6" +order += "battery all" +#order += "cpu_usage" +order += "load" +order += "cpu_temperature package" +order += "memory" +order += "disk /" +order += "tztime local" + +volume master { + format = "vol %volume" + format_muted = "muted (%volume)" + device = "default" + mixer = "Master" + mixer_idx = 0 +} + +ipv6 { + format_up = "%ip" + format_down = "" +} + +ethernet _first_ { + format_up = "%interface:%ip" + #format_up = "W:%ip" + format_down = "" +} + +ethernet wg0 { + format_up = "wg0" + format_down = "" +} + +wireless wlp1s0 { + format_up = "%essid" + format_down = "wireless down" +} + +battery all { + format = "%status %percentage %remaining %consumption" + format_down = "No battery" + integer_battery_capacity = true + status_chr = "CHR" + status_bat = "BAT" + status_unk = "UNK" + status_full = "FULL" +} + +disk "/" { + format = "%avail" + prefix_type = binary +} + +cpu_usage { + format = "CPU:%usage" +} + +load { + format = "%1min %5min %15min" +} + +cpu_temperature package { + format = "%degrees°C" + path = "/sys/class/hwmon/hwmon1/temp1_input" + max_threshold = 90 +} + +memory { + #format = "%used|%available" + format = "%used %percentage_used" + threshold_degraded = "1G" + format_degraded = "MEMORY < %available" +} + +tztime local { + format = "%m-%d-%Y %H:%M:%S" +} diff --git a/i3/titanium/i3/config b/i3/titanium/i3/config new file mode 100755 index 0000000..05b6ddc --- /dev/null +++ b/i3/titanium/i3/config @@ -0,0 +1,255 @@ +# i3 config file (v4) +# +# Please see https://i3wm.org/docs/userguide.html for a complete reference! + +# Font for window titles. Will also be used by the bar unless a different font +# is used in the bar {} block below. +font pango:CaskaydiaCoveNerdFontMono 11 + +# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the +# screen before suspend. Use loginctl lock-session to lock your screen. +exec --no-startup-id xset s 900 900 +exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork -c 222222 +#exec --no-startup-id xautolock -time 20 -locker "systemctl suspend" + +# volume control +set $refresh_i3status killall -SIGUSR1 i3status +bindsym XF86AudioRaiseVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%+ && $refresh_i3status +bindsym XF86AudioLowerVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%- && $refresh_i3status +bindsym XF86AudioMute exec --no-startup-id wpctl set-mute @DEFAULT_SINK@ toggle && $refresh_i3status + +# keyboard media controls +bindsym XF86AudioPlay exec --no-startup-id playerctl play-pause +bindsym XF86AudioPause exec --no-startup-id playerctl play-pause +bindsym XF86AudioStop exec --no-startup-id playerctl stop +bindsym XF86AudioNext exec --no-startup-id playerctl next +bindsym XF86AudioPrev exec --no-startup-id playerctl previous + +bindsym Mod1+p exec --no-startup-id playerctl play-pause +bindsym Mod1+Right exec --no-startup-id playerctl next +bindsym Mod1+Left exec --no-startup-id playerctl previous +bindsym Mod1+Up exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%+ && $refresh_i3status +bindsym Mod1+Down exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%- && $refresh_i3status +bindsym Mod1+m exec --no-startup-id wpctl set-mute @DEFAULT_SINK@ toggle && $refresh_i3status + +# use these keys for focus, movement, and resize directions when reaching for +# the arrows is not convenient +set $up k +set $down j +set $left h +set $right l + +# use Mouse+Mod1 to drag floating windows to their wanted position +floating_modifier Mod1 + +# launch commonly used apps +bindsym Mod1+x exec --no-startup-id xterm +bindsym Mod1+Shift+s exec --no-startup-id firefox +bindsym Mod1+Shift+Ctrl+s exec --no-startup-id spotify-launcher +bindsym Mod1+g exec --no-startup-id gpu-screen-recorder-gtk + +# kill focused window +bindsym Mod1+Shift+q kill + +# start dmenu (a program launcher) +bindsym Mod1+d exec --no-startup-id dmenu_run +bindsym Mod1+Tab exec --no-startup-id rofi -show drun +# A more modern dmenu replacement is rofi: +# bindsym Mod1+d exec "rofi -modi drun,run -show drun" +# There also is i3-dmenu-desktop which only displays applications shipping a +# .desktop file. It is a wrapper around dmenu, so you need that installed. +# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop + +# change focus +bindsym Mod1+$left focus left +bindsym Mod1+$down focus down +bindsym Mod1+$up focus up +bindsym Mod1+$right focus right + +# move focused window +bindsym Mod1+Shift+$left move left +bindsym Mod1+Shift+$down move down +bindsym Mod1+Shift+$up move up +bindsym Mod1+Shift+$right move right + +# split in horizontal orientation +bindsym Mod1+b split h + +# split in vertical orientation +bindsym Mod1+v split v + +# enter fullscreen mode for the focused container +bindsym Mod1+f fullscreen toggle + +# full(x.org)screen for focused container +bindsym Mod1+Shift+f fullscreen toggle global + +# change container layout (stacked, tabbed, toggle split) +bindsym Mod1+s layout stacking +bindsym Mod1+w layout tabbed +bindsym Mod1+e layout toggle split + +# toggle tiling / floating +bindsym Mod1+Shift+space floating toggle + +# change focus between tiling / floating windows +bindsym Mod1+space focus mode_toggle + +# focus the parent container +bindsym Mod1+a focus parent + +# focus the child container +#bindsym Mod1+d focus child + +# move the currently focused window to the scratchpad +bindsym Mod1+Shift+minus move scratchpad + +# Show the next scratchpad window or hide the focused scratchpad window. +# If there are multiple scratchpad windows, this command cycles through them. +bindsym Mod1+minus scratchpad show + +# Define names for default workspaces for which we configure key bindings later on. +# We use variables to avoid repeating the names in multiple places. +set $ws1 "1" +set $ws2 "2" +set $ws3 "3" +set $ws4 "4" +set $ws5 "5" +set $ws6 "6" +set $ws7 "7" +set $ws8 "8" +set $ws9 "9" +set $ws10 "10" + +# switch to workspace +bindsym Mod1+1 workspace number $ws1 +bindsym Mod1+2 workspace number $ws2 +bindsym Mod1+3 workspace number $ws3 +bindsym Mod1+4 workspace number $ws4 +bindsym Mod1+5 workspace number $ws5 +bindsym Mod1+6 workspace number $ws6 +bindsym Mod1+7 workspace number $ws7 +bindsym Mod1+8 workspace number $ws8 +bindsym Mod1+9 workspace number $ws9 +bindsym Mod1+0 workspace number $ws10 +#bindsym Mod1+m workspace $wsMain +#bindsym Mod1+s workspace $wsSide +#bindsym Mod1+g workspace $wsGame + +# move focused container to workspace +bindsym Mod1+Shift+1 move container to workspace number $ws1 +bindsym Mod1+Shift+2 move container to workspace number $ws2 +bindsym Mod1+Shift+3 move container to workspace number $ws3 +bindsym Mod1+Shift+4 move container to workspace number $ws4 +bindsym Mod1+Shift+5 move container to workspace number $ws5 +bindsym Mod1+Shift+6 move container to workspace number $ws6 +bindsym Mod1+Shift+7 move container to workspace number $ws7 +bindsym Mod1+Shift+8 move container to workspace number $ws8 +bindsym Mod1+Shift+9 move container to workspace number $ws9 +bindsym Mod1+Shift+0 move container to workspace number $ws10 +#bindsym Mod1+Shift+m move container to workspace $wsMain +#bindsym Mod1+Shift+s move container to workspace $wsSide +#bindsym Mod1+Shift+g move container to workspace $wsGame + +# reload the configuration file +bindsym Mod1+Shift+c reload +# restart i3 inplace (preserves your layout/session, can be used to upgrade i3) +bindsym Mod1+Shift+r restart +# exit i3 (logs you out of your X session) +bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'" + +# resize window (you can also use the mouse for that) +mode "resize" { + # These bindings trigger as soon as you enter the resize mode + + # Pressing left will shrink the window’s width. + # Pressing right will grow the window’s width. + # Pressing up will shrink the window’s height. + # Pressing down will grow the window’s height. + bindsym $left resize shrink width 10 px or 10 ppt + bindsym $down resize grow height 10 px or 10 ppt + bindsym $up resize shrink height 10 px or 10 ppt + bindsym $right resize grow width 10 px or 10 ppt + + # same bindings, but for the arrow keys + bindsym Left resize shrink width 10 px or 10 ppt + bindsym Down resize grow height 10 px or 10 ppt + bindsym Up resize shrink height 10 px or 10 ppt + bindsym Right resize grow width 10 px or 10 ppt + + # back to normal: Enter or Escape or Mod1+r + bindsym Return mode default + bindsym Escape mode default + bindsym Mod1+r mode default +} + +bindsym Mod1+r mode "resize" + + +# display stuff +set $144Hz xrandr --output DP-0 --mode 3440x1440 --rate 144 --primary +set $60Hz xrandr --output DP-0 --mode 3440x1440 --rate 60 --primary +exec --no-startup-id $144Hz + +set $displaycontrol display control: (1) -> 144Hz, (6) -> 60Hz + +mode "$displaycontrol" { + bindsym 6 exec --no-startup-id $60Hz, mode default + bindsym 1 exec --no-startup-id $144Hz, mode default + bindsym Return mode default + bindsym Escape mode default +} + +bindsym Mod1+Shift+d mode "$displaycontrol" + +# Start i3bar to display a workspace bar (plus the system information i3status +# finds out, if available) +bar { + status_command i3status + tray_output primary + position top +} + +# stuff and things +exec_always --no-startup-id xset r rate 200 40 +exec_always --no-startup-id liquidctl initialize all && sleep 1 && liquidctl --match "Corsair Hydro H100i Platinum" set fan speed 20 20 24 35 28 40 30 50 32 60 40 90 +#exec_always --no-startup-id killall polybar ; polybar +exec --no-startup-id xsetroot -solid "#222222" +exec --no-startup-id redshift-gtk +exec --no-startup-id easyeffects --gapplication-service +exec --no-startup-id solaar --window=hide +exec --no-startup-id IMAGE=$(ls ~/.images | shuf -n 1) ; feh --no-fehbg --bg-fill ~/.images/$IMAGE +exec --no-startup-id picom + +# added binds +bindsym Mod1+c exec --no-startup-id xdotool click --repeat 20 --delay 50 1 +bindsym Mod1+Shift+b exec --no-startup-id feh --no-fehbg --bg-fill ~/.images/$(ls ~/.images | dmenu -c -l 10) + +# window borders +default_border pixel 4 +#hide_edge_borders none + +# window gaps +gaps inner 16 +gaps outer 4 + +# colors +#client.unfocused #FAA408 #FAA408 #FAA408 #FAA408 #FAA408 + + +# power controls +set $Locker i3lock -c 222222 && sleep 1 +set $mode_system System (l) lock, (e) logout, (s) suspend, (r) reboot, (Shift+s) shutdown + +mode "$mode_system" { + bindsym l exec --no-startup-id $Locker, mode default + bindsym e exec --no-startup-id i3-msg exit, mode default + bindsym s exec --no-startup-id $Locker && systemctl suspend, mode default + bindsym r exec --no-startup-id systemctl reboot, mode default + bindsym Shift+s exec --no-startup-id systemctl poweroff -i, mode default + # back to normal: Enter or Escape + bindsym Return mode default + bindsym Escape mode default +} + +bindsym Mod1+End mode "$mode_system" diff --git a/i3/titanium/i3status/config b/i3/titanium/i3status/config new file mode 100755 index 0000000..4ec67b2 --- /dev/null +++ b/i3/titanium/i3status/config @@ -0,0 +1,84 @@ +# i3status configuration file. +# see "man i3status" for documentation. + +# It is important that this file is edited as UTF-8. +# The following line should contain a sharp s: +# ß +# If the above line is not correctly displayed, fix your editor first! + +general { + colors = true + interval = 1 +} + +order += "volume master" +order += "ethernet enp3s0" +order += "ethernet eno2" +order += "ipv6" +order += "disk /" +#order += "cpu_usage" +order += "load" +order += "cpu_temperature package" +order += "memory" +order += "tztime local" + +volume master { + format = "vol: %volume" + format_muted = "muted (%volume)" + device = "default" + mixer = "Master" + mixer_idx = 0 +} + +ipv6 { + format_up = "%ip" + format_down = "" +} + +ethernet enp3s0 { + #format_up = "%interface: %ip" + format_up = "%interface: %ip [%speed]" + format_down = "" +} + +ethernet eno2 { + #format_up = "%interface: %ip" + format_up = "%ip [%speed]" + format_down = "" +} + +battery all { + format = "%percentage" +} + +disk "/" { + format = "%avail" + prefix_type = binary +} + +cpu_usage { + format = "CPU: %usage" +} + +load { + format = "%1min %5min %15min" + max_threshold = 12 +} + +cpu_temperature package { + format = "%degrees°C" + path = "/sys/devices/platform/coretemp.0/hwmon/hwmon*/temp1_input" + #path = "/sys/class/hwmon/hwmon9/temp1_input" + max_threshold = 90 +} + +memory { + format = "%used | %available" + format = "%used %percentage_used" + threshold_degraded = "1G" + format_degraded = "MEMORY < %available" +} + +tztime local { + format = "%m-%d-%Y %H:%M:%S" +} diff --git a/i3/tungsten/i3/config b/i3/tungsten/i3/config new file mode 100644 index 0000000..c036263 --- /dev/null +++ b/i3/tungsten/i3/config @@ -0,0 +1,259 @@ +# i3 config file (v4) +# +# Please see https://i3wm.org/docs/userguide.html for a complete reference! +# +# This config file uses keycodes (bindsym) and was written for the QWERTY +# layout. +# +# To get a config file with the same key positions, but for your current +# layout, use the i3-config-wizard +# + +# Font for window titles. Will also be used by the bar unless a different font +# is used in the bar {} block below. +font pango:CaskaydiaCoveNerdFontMono 16 + +# This font is widely installed, provides lots of unicode glyphs, right-to-left +# text rendering and scalability on retina/hidpi displays (thanks to pango). +#font pango:DejaVu Sans Mono 8 + +# Start XDG autostart .desktop files using dex. See also +# https://wiki.archlinux.org/index.php/XDG_Autostart +exec --no-startup-id dex --autostart --environment i3 + +# The combination of xss-lock, nm-applet and pactl is a popular choice, so +# they are included here as an example. Modify as you see fit. + +# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the +# screen before suspend. Use loginctl lock-session to lock your screen. +exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork + +# NetworkManager is the most popular way to manage wireless networks on Linux, +# and nm-applet is a desktop environment-independent system tray GUI for it. +# exec --no-startup-id nm-applet + +# volume control +set $refresh_i3status killall -SIGUSR1 i3status +bindsym XF86AudioRaiseVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 1%+ && $refresh_i3status +bindsym XF86AudioLowerVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 1%- && $refresh_i3status +bindsym XF86AudioMute exec --no-startup-id wpctl set-mute @DEFAULT_SINK@ toggle && $refresh_i3status + +# keyboard media controls +bindsym XF86AudioPlay exec --no-startup-id playerctl play-pause +bindsym XF86AudioPause exec --no-startup-id playerctl play-pause +bindsym XF86AudioNext exec --no-startup-id playerctl next +bindsym XF86AudioPrev exec --no-startup-id playerctl previous + +mode $mediacontrols { + bindsym h exec --no-startup-id playerctl previous + bindsym j exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%- && $refresh_i3status + bindsym k exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%+ && $refresh_i3status + bindsym m exec --no-startup-id wpctl set-mute @DEFAULT_SINK@ toggle && $refresh_i3status + bindsym l exec --no-startup-id playerctl next + bindsym p exec --no-startup-id playerctl play-pause + + bindsym Return mode default + bindsym Escape mode default +} + +set $mediacontrols "vim-like media controls" +bindsym Mod1+m mode $mediacontrols + +# use these keys for focus, movement, and resize directions when reaching for +# the arrows is not convenient +set $up k +set $down j +set $left h +set $right l + +# use Mouse+Mod1 to drag floating windows to their wanted position +floating_modifier Mod1 + +# move tiling windows via drag & drop by left-clicking into the title bar, +# or left-clicking anywhere into the window while holding the floating modifier. +tiling_drag modifier titlebar + +# start commonly used apps +bindsym Mod1+q exec --no-startup-id kitty +bindsym Mod1+x exec --no-startup-id xterm +bindsym Mod1+Shift+s exec --no-startup-id firefox +bindsym Mod1+Ctrl+Shift+s exec --no-startup-id spotify-launcher + +# kill focused window +bindsym Mod1+Shift+q kill + +# start dmenu (a program launcher) +bindsym Mod1+Tab exec --no-startup-id rofi -show drun +# A more modern dmenu replacement is rofi: +# bindsym Mod1+d exec "rofi -modi drun,run -show drun" +# There also is i3-dmenu-desktop which only displays applications shipping a +# .desktop file. It is a wrapper around dmenu, so you need that installed. +# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop + +# change focus +bindsym Mod1+$left focus left +bindsym Mod1+$down focus down +bindsym Mod1+$up focus up +bindsym Mod1+$right focus right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Left focus left +bindsym Mod1+Down focus down +bindsym Mod1+Up focus up +bindsym Mod1+Right focus right + +# move focused window +bindsym Mod1+Shift+$left move left +bindsym Mod1+Shift+$down move down +bindsym Mod1+Shift+$up move up +bindsym Mod1+Shift+$right move right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Shift+Left move left +bindsym Mod1+Shift+Down move down +bindsym Mod1+Shift+Up move up +bindsym Mod1+Shift+Right move right + +# split in horizontal orientation +bindsym Mod1+b split h + +# split in vertical orientation +bindsym Mod1+v split v + +# enter fullscreen mode for the focused container +bindsym Mod1+f fullscreen toggle + +# change container layout (stacked, tabbed, toggle split) +bindsym Mod1+s layout stacking +bindsym Mod1+w layout tabbed +bindsym Mod1+e layout toggle split + +# toggle tiling / floating +bindsym Mod1+Shift+space floating toggle + +# change focus between tiling / floating windows +bindsym Mod1+space focus mode_toggle + +# focus the parent container +bindsym Mod1+a focus parent + +# focus the child container +#bindsym Mod1+d focus child + +# move the currently focused window to the scratchpad +bindsym Mod1+Shift+minus move scratchpad + +# Show the next scratchpad window or hide the focused scratchpad window. +# If there are multiple scratchpad windows, this command cycles through them. +bindsym Mod1+minus scratchpad show + +# Define names for default workspaces for which we configure key bindings later on. +# We use variables to avoid repeating the names in multiple places. +set $ws1 "1" +set $ws2 "2" +set $ws3 "3" +set $ws4 "4" +set $ws5 "5" +set $ws6 "6" +set $ws7 "7" +set $ws8 "8" +set $ws9 "9" +set $ws10 "10" + +# switch to workspace +bindsym Mod1+1 workspace number $ws1 +bindsym Mod1+2 workspace number $ws2 +bindsym Mod1+3 workspace number $ws3 +bindsym Mod1+4 workspace number $ws4 +bindsym Mod1+5 workspace number $ws5 +bindsym Mod1+6 workspace number $ws6 +bindsym Mod1+7 workspace number $ws7 +bindsym Mod1+8 workspace number $ws8 +bindsym Mod1+9 workspace number $ws9 +bindsym Mod1+0 workspace number $ws10 + +# move focused container to workspace +bindsym Mod1+Shift+1 move container to workspace number $ws1 +bindsym Mod1+Shift+2 move container to workspace number $ws2 +bindsym Mod1+Shift+3 move container to workspace number $ws3 +bindsym Mod1+Shift+4 move container to workspace number $ws4 +bindsym Mod1+Shift+5 move container to workspace number $ws5 +bindsym Mod1+Shift+6 move container to workspace number $ws6 +bindsym Mod1+Shift+7 move container to workspace number $ws7 +bindsym Mod1+Shift+8 move container to workspace number $ws8 +bindsym Mod1+Shift+9 move container to workspace number $ws9 +bindsym Mod1+Shift+0 move container to workspace number $ws10 + +# reload the configuration file +bindsym Mod1+Shift+c reload +# restart i3 inplace (preserves your layout/session, can be used to upgrade i3) +bindsym Mod1+Shift+r restart +# exit i3 (logs you out of your X session) +bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'" + +# resize window (you can also use the mouse for that) +mode "resize" { + # These bindings trigger as soon as you enter the resize mode + + # Pressing left will shrink the window’s width. + # Pressing right will grow the window’s width. + # Pressing up will shrink the window’s height. + # Pressing down will grow the window’s height. + bindsym $left resize shrink width 10 px or 10 ppt + bindsym $down resize grow height 10 px or 10 ppt + bindsym $up resize shrink height 10 px or 10 ppt + bindsym $right resize grow width 10 px or 10 ppt + + # same bindings, but for the arrow keys + bindsym Left resize shrink width 10 px or 10 ppt + bindsym Down resize grow height 10 px or 10 ppt + bindsym Up resize shrink height 10 px or 10 ppt + bindsym Right resize grow width 10 px or 10 ppt + + # back to normal: Enter or Escape or Mod1+r + bindsym Return mode "default" + bindsym Escape mode "default" + bindsym Mod1+r mode "default" +} + +bindsym Mod1+r mode "resize" + +# Start i3bar to display a workspace bar (plus the system information i3status +# finds out, if available) +bar { + status_command i3status + tray_output primary + position top +} + +exec --no-startup-id xsetroot -solid "#222222" +exec_always --no-startup-id xset r rate 200 35 +exec --no-startup-id redshift +exec --no-startup-id xrandr --output HDMI-0 --mode 1920x1080 --primary --rate 59.94 +bindsym Shift+s exec --no-startup-id maim ~/Pictures/"$(date)".png + +# window borders +default_border pixel 4 +#hide_edge_borders none +smart_borders on + + +set $Locker i3lock && sleep 1 + +# power controls + +set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown +mode "$mode_system" { + bindsym l exec --no-startup-id $Locker, mode "default" + bindsym e exec --no-startup-id i3-msg exit, mode "default" + bindsym s exec --no-startup-id $Locker && systemctl suspend, mode "default" + bindsym h exec --no-startup-id $Locker && systemctl hibernate, mode "default" + bindsym r exec --no-startup-id systemctl reboot, mode "default" + bindsym Shift+s exec --no-startup-id systemctl poweroff -i, mode "default" + + # back to normal: Enter or Escape + bindsym Return mode "default" + bindsym Escape mode "default" +} + +bindsym Mod1+End mode "$mode_system" diff --git a/i3/tungsten/i3status/config b/i3/tungsten/i3status/config new file mode 100755 index 0000000..a1c493e --- /dev/null +++ b/i3/tungsten/i3status/config @@ -0,0 +1,64 @@ +# i3status configuration file. +# see "man i3status" for documentation. + +# It is important that this file is edited as UTF-8. +# The following line should contain a sharp s: +# ß +# If the above line is not correctly displayed, fix your editor first! + +general { + colors = true + interval = 1 +} + +order += "volume master" +order += "ethernet _first_" +order += "ipv6" +order += "disk /home" +order += "cpu_usage" +order += "cpu_temperature package" +order += "memory" +order += "tztime local" + +volume master { + format = "vol: %volume" + format_muted = "muted (%volume)" + device = "default" +} + +ipv6 { + format_up = "%ip" + format_down = "" +} + +ethernet _first_ { + format_up = "%interface:%ip" + format_down = "IPv4: down" +} + +battery all { + format = "%percentage" +} + +disk "/home" { + format = "%avail" +} + +cpu_usage { + format = "CPU: %usage" +} + +cpu_temperature package { + format = "%degrees °C" + path = "/sys/class/hwmon/hwmon2/temp1_input" +} + +memory { + format = "%used %percentage_used" + threshold_degraded = "1G" + format_degraded = "MEMORY < %available" +} + +tztime local { + format = "%m-%d-%Y %H:%M:%S" +} diff --git a/i3/zinc/i3/config b/i3/zinc/i3/config new file mode 100755 index 0000000..4b4e85c --- /dev/null +++ b/i3/zinc/i3/config @@ -0,0 +1,245 @@ +# i3 config file (v4) +# +# Please see https://i3wm.org/docs/userguide.html for a complete reference! +# +# This config file uses keycodes (bindsym) and was written for the QWERTY +# layout. +# +# To get a config file with the same key positions, but for your current +# layout, use the i3-config-wizard +# + +# Font for window titles. Will also be used by the bar unless a different font +# is used in the bar {} block below. + +font pango:CaskaydiaCoveNFM 12 + +# This font is widely installed, provides lots of unicode glyphs, right-to-left +# text rendering and scalability on retina/hidpi displays (thanks to pango). +#font pango:DejaVu Sans Mono 8 + +# Start XDG autostart .desktop files using dex. See also +# https://wiki.archlinux.org/index.php/XDG_Autostart +exec --no-startup-id dex --autostart --environment i3 + +# The combination of xss-lock, nm-applet and pactl is a popular choice, so +# they are included here as an example. Modify as you see fit. + +# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the +# screen before suspend. Use loginctl lock-session to lock your screen. +exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork -e + +# adjust volume with wpctl (wireplumber) +bindsym XF86AudioRaiseVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%+ && $refresh_i3status +bindsym XF86AudioLowerVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%- && $refresh_i3status +bindsym XF86AudioMute exec --no-startup-id wpctl set-mute @DEFAULT_SINK@ toggle && $refresh_i3status + +# keyboard media controls +bindsym XF86AudioPlay exec --no-startup-id playerctl play-pause +bindsym XF86AudioPause exec --no-startup-id playerctl play-pause +bindsym XF86AudioNext exec --no-startup-id playerctl next +bindsym XF86AudioPrev exec --no-startup-id playerctl previous +bindsym XF86AudioStop exec --no-startup-id playerctl stop + +# use these keys for focus, movement, and resize directions when reaching for +# the arrows is not convenient +set $up k +set $down j +set $left h +set $right l + +# use Mouse+Mod1 to drag floating windows to their wanted position +floating_modifier Mod1 + +# move tiling windows via drag & drop by left-clicking into the title bar, +# or left-clicking anywhere into the window while holding the floating modifier. +tiling_drag modifier titlebar + +# start a terminal +bindsym Mod1+Return exec --no-startup-id kitty + +# start a browser +bindsym Mod1+Shift+Return exec --no-startup-id firefox-developer-edition + +# start spotify +bindsym Mod1+Ctrl+Shift+Return exec --no-startup-id spotify-launcher + +# kill focused window +bindsym Mod1+Shift+q kill + +# start dmenu (a program launcher) +bindsym Mod1+d exec --no-startup-id dmenu_run -fn CaskaydiaCoveNerdFontMono +# A more modern dmenu replacement is rofi: +# bindsym Mod1+d exec "rofi -modi drun,run -show drun" +# There also is i3-dmenu-desktop which only displays applications shipping a +# .desktop file. It is a wrapper around dmenu, so you need that installed. +# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop + +# change focus +bindsym Mod1+$left focus left +bindsym Mod1+$down focus down +bindsym Mod1+$up focus up +bindsym Mod1+$right focus right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Left focus left +bindsym Mod1+Down focus down +bindsym Mod1+Up focus up +bindsym Mod1+Right focus right + +# move focused window +bindsym Mod1+Shift+$left move left +bindsym Mod1+Shift+$down move down +bindsym Mod1+Shift+$up move up +bindsym Mod1+Shift+$right move right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Shift+Left move left +bindsym Mod1+Shift+Down move down +bindsym Mod1+Shift+Up move up +bindsym Mod1+Shift+Right move right + +# split in horizontal orientation +bindsym Mod1+b split h + +# split in vertical orientation +bindsym Mod1+v split v + +# enter fullscreen mode for the focused container +bindsym Mod1+f fullscreen toggle + +# change container layout (stacked, tabbed, toggle split) +bindsym Mod1+s layout stacking +bindsym Mod1+w layout tabbed +bindsym Mod1+e layout toggle split + +# toggle tiling / floating +bindsym Mod1+Shift+space floating toggle + +# change focus between tiling / floating windows +bindsym Mod1+space focus mode_toggle + +# focus the parent container +bindsym Mod1+a focus parent + +# focus the child container +#bindsym Mod1+d focus child + +# move the currently focused window to the scratchpad +bindsym Mod1+Shift+minus move scratchpad + +# Show the next scratchpad window or hide the focused scratchpad window. +# If there are multiple scratchpad windows, this command cycles through them. +bindsym Mod1+minus scratchpad show + +# Define names for default workspaces for which we configure key bindings later on. +# We use variables to avoid repeating the names in multiple places. +set $ws1 "1" +set $ws2 "2" +set $ws3 "3" +set $ws4 "4" +set $ws5 "5" +set $ws6 "6" +set $ws7 "7" +set $ws8 "8" +set $ws9 "9" +set $ws10 "10" + +# switch to workspace +bindsym Mod1+1 workspace number $ws1 +bindsym Mod1+2 workspace number $ws2 +bindsym Mod1+3 workspace number $ws3 +bindsym Mod1+4 workspace number $ws4 +bindsym Mod1+5 workspace number $ws5 +bindsym Mod1+6 workspace number $ws6 +bindsym Mod1+7 workspace number $ws7 +bindsym Mod1+8 workspace number $ws8 +bindsym Mod1+9 workspace number $ws9 +bindsym Mod1+0 workspace number $ws10 + +# move focused container to workspace +bindsym Mod1+Shift+1 move container to workspace number $ws1 +bindsym Mod1+Shift+2 move container to workspace number $ws2 +bindsym Mod1+Shift+3 move container to workspace number $ws3 +bindsym Mod1+Shift+4 move container to workspace number $ws4 +bindsym Mod1+Shift+5 move container to workspace number $ws5 +bindsym Mod1+Shift+6 move container to workspace number $ws6 +bindsym Mod1+Shift+7 move container to workspace number $ws7 +bindsym Mod1+Shift+8 move container to workspace number $ws8 +bindsym Mod1+Shift+9 move container to workspace number $ws9 +bindsym Mod1+Shift+0 move container to workspace number $ws10 + +# reload the configuration file +bindsym Mod1+Shift+c reload +# restart i3 inplace (preserves your layout/session, can be used to upgrade i3) +bindsym Mod1+Shift+r restart +# exit i3 (logs you out of your X session) +bindsym Mod1+Shift+e exec --no-startup-id "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'" + +# resize window (you can also use the mouse for that) +mode "resize" { + # These bindings trigger as soon as you enter the resize mode + + # Pressing left will shrink the window’s width. + # Pressing right will grow the window’s width. + # Pressing up will shrink the window’s height. + # Pressing down will grow the window’s height. + bindsym $left resize shrink width 10 px or 10 ppt + bindsym $down resize grow height 10 px or 10 ppt + bindsym $up resize shrink height 10 px or 10 ppt + bindsym $right resize grow width 10 px or 10 ppt + + # same bindings, but for the arrow keys + bindsym Left resize shrink width 10 px or 10 ppt + bindsym Down resize grow height 10 px or 10 ppt + bindsym Up resize shrink height 10 px or 10 ppt + bindsym Right resize grow width 10 px or 10 ppt + + # back to normal: Enter or Escape or Mod1+r + bindsym Return mode "default" + bindsym Escape mode "default" + bindsym Mod1+r mode "default" +} + +bindsym Mod1+r mode "resize" + +# Start i3bar to display a workspace bar (plus the system information i3status +# finds out, if available) +bar { + status_command i3status + position top +} + +# misc +exec --no-startup-id xsetroot -solid "#222222" +exec --no-startup-id xset r rate 200 35 +exec --no-startup-id easyeffects --gapplication-service +exec --no-startup-id redshift +exec --no-startup-id solaar --window=hide +# exec --no-startup-id fcitx + +## Screenshots +bindsym Print exec --no-startup-id maim "/home/$USER/pictures/$(date)" + +# window borders +default_border pixel 4 +smart_borders on + +set $Locker i3lock -e && sleep 1 + +# power controls: +set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown +mode "$mode_system" { + bindsym l exec --no-startup-id $Locker, mode "default" + bindsym e exec --no-startup-id i3-msg exit, mode "default" + bindsym s exec --no-startup-id $Locker && systemctl suspend, mode "default" + bindsym h exec --no-startup-id $Locker && systemctl hibernate, mode "default" + bindsym r exec --no-startup-id systemctl reboot, mode "default" + bindsym Shift+s exec --no-startup-id systemctl poweroff -i, mode "default" + + # back to normal: Enter or Escape + bindsym Return mode "default" + bindsym Escape mode "default" +} + +bindsym Mod1+End mode "$mode_system" diff --git a/i3/zinc/i3status/config b/i3/zinc/i3status/config new file mode 100755 index 0000000..3a78b89 --- /dev/null +++ b/i3/zinc/i3status/config @@ -0,0 +1,69 @@ +# i3status configuration file. +# see "man i3status" for documentation. + +# It is important that this file is edited as UTF-8. +# The following line should contain a sharp s: +# ß +# If the above line is not correctly displayed, fix your editor first! + +general { + colors = true + interval = 1 +} + +order += "volume master" +# order += "battery all" +order += "ethernet _first_" +order += "cpu_usage" +order += "cpu_temperature package" +order += "disk /" +order += "memory" +order += "tztime local" + +volume master { + format = "vol:%volume" + format_muted = "muted (%volume)" + device = "default" +} + +battery all { + format = "%remaining" + format_down = "no battery" +} + +ethernet _first_ { + format_up = "%interface: %ip [%speed]" + format_down = "%interface: down" +} + +ipv6 { + format_up = "IPv6: %ip" + format_down = "IPv6: down" +} +cpu_usage { + format = "CPU: %usage" + path = "/proc/stat" +} + +cpu_temperature package { + format = "%degrees °C" + path = "/sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input" +} + +disk "/" { + format = "%avail" +} + +load { + format = "%1min" +} + +memory { + format = "%used | %available" + threshold_degraded = "1G" + format_degraded = "MEMORY < %available" +} + +tztime local { + format = "%m-%d-%Y %H:%M:%S" +} |