30 files changed, 535 insertions, 0 deletions
diff --git a/bin/audioswitch b/bin/audioswitch
new file mode 100755
index 0000000..8b910c1
--- /dev/null
+++ b/bin/audioswitch
@@ -0,0 +1,14 @@
+#!/bin/sh
+CARD=$(pactl list cards short | grep '1f.3' | awk '{print $2}')
+CURRENT_SINK=$(pactl info | grep "Default Sink:")
+dunstctl close-all
+case $CURRENT_SINK in
+  *iec958*)
+    pactl set-card-profile $CARD output:analog-stereo
+    notify-send "analog out active" -i :
+    ;;
+  *)
+    pactl set-card-profile $CARD output:iec958-stereo
+    notify-send "digital out active" -i :
+    ;;
+esac
diff --git a/bin/autoclick b/bin/autoclick
new file mode 100755
index 0000000..65cb627
--- /dev/null
+++ b/bin/autoclick
@@ -0,0 +1,2 @@
+#!/bin/sh
+xdotool click --repeat 32 --delay 50 1
diff --git a/bin/bgselect b/bin/bgselect
new file mode 100755
index 0000000..ca955ed
--- /dev/null
+++ b/bin/bgselect
@@ -0,0 +1,2 @@
+#!/bin/sh
+SELECTION=$(ls ~/repos/bag/ | dmenu -c -i -l 10 ) && feh --no-fehbg --bg-fill ~/repos/bag/$SELECTION
diff --git a/bin/brightness b/bin/brightness
new file mode 100755
index 0000000..fb21f26
--- /dev/null
+++ b/bin/brightness
@@ -0,0 +1,12 @@
+#!/bin/sh
+dunstctl close-all
+case "$1" in
+  "up")
+    brightnessctl set "$2"%+;;
+  "down")
+    brightnessctl set "$2"%-;;
+esac
+CURRENT=$(brightnessctl get)
+MAX=$(brightnessctl max)
+BRIGHTNESS=$(echo "scale=2; ("$CURRENT"/"$MAX")*100" | bc | sed s/\.00$//g)
+notify-send "Brightness set to "$BRIGHTNESS%"" -i :
diff --git a/bin/browser b/bin/browser
new file mode 100755
index 0000000..eb89c66
--- /dev/null
+++ b/bin/browser
@@ -0,0 +1,2 @@
+#!/bin/sh
+firefox&
diff --git a/bin/calculator b/bin/calculator
new file mode 100755
index 0000000..d8257cf
--- /dev/null
+++ b/bin/calculator
@@ -0,0 +1,8 @@
+#!/bin/sh
+#EXPRESSION=$(printf "" | dmenu -b -w $(xdotool getactivewindow) -p "calculator")
+#RESULT=$(qalc $EXPRESSION)
+#printf "" | dmenu -b -w $(xdotool getactivewindow) -p "$RESULT"
+#echo $RESULT | sed 's/^[^=≈]*[=≈]//' | xclip -selection clipboard
+
+# start qalc in terminal instead
+st -i -g 60x20-100+100 -e qalc
diff --git a/bin/cpuctl b/bin/cpuctl
new file mode 100755
index 0000000..d2c2b57
--- /dev/null
+++ b/bin/cpuctl
@@ -0,0 +1,31 @@
+#!/bin/sh
+MIN_FREQUENCY=$(cat /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_min_freq)
+MAX_FREQUENCY=$(cat /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_max_freq)
+SCALING_MAX=$(cat /sys/devices/system/cpu/cpufreq/policy0/scaling_max_freq)
+SCALING_MIN=$(cat /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq)
+GOVERNOR=$(cat /sys/devices/system/cpu/cpufreq/policy0/scaling_governor)
+
+if [ "$1" = "get" ]; then
+  echo "Minimum / Maximum Frequencies: $SCALING_MIN / $SCALING_MAX"
+  echo "Governor: $GOVERNOR"
+elif [ "$1" = "set" ]; then
+  case "$2" in
+    "")
+      echo "Set what? Nothing was changed, exiting...";;
+    "defaults")
+      echo "$MIN_FREQUENCY" | sudo tee /sys/devices/system/cpu/cpufreq/policy*/scaling_min_freq
+      echo "$MAX_FREQUENCY" | sudo tee /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq;;
+    "minfreq")
+      echo "$MIN_FREQUENCY" | sudo tee /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq
+      echo "$MIN_FREQUENCY" | sudo tee /sys/devices/system/cpu/cpufreq/policy*/scaling_min_freq;;
+    "maxfreq")
+      echo "$MAX_FREQUENCY" | sudo tee /sys/devices/system/cpu/cpufreq/policy*/scaling_min_freq
+      echo "$MAX_FREQUENCY" | sudo tee /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq;;
+    "ondemand")
+      echo "ondemand" | sudo tee /sys/devices/system/cpu/cpufreq/policy*/scaling_governor;;
+    "schedutil")
+      echo "schedutil" | sudo tee /sys/devices/system/cpu/cpufreq/policy*/scaling_governor;;
+    "performance")
+      echo "performance" | sudo tee /sys/devices/system/cpu/cpufreq/policy*/scaling_governor;;
+  esac
+fi
diff --git a/bin/displayctl b/bin/displayctl
new file mode 100755
index 0000000..85c6c7b
--- /dev/null
+++ b/bin/displayctl
@@ -0,0 +1,36 @@
+#!/bin/sh
+
+# unused for now, repurposing for ddcutil control
+## back in use!
+
+CHOICE=$(printf "brightness\ncontrast\ntoggle secondary display" | dmenu -c -i -l 3)
+DISPLAY_STATUS=$(xrandr | grep DisplayPort-0)
+MONITORS="1 2"
+
+toggle() {
+  case $DISPLAY_STATUS in
+    *3440x1440*)
+      xrandr --output DisplayPort-0 --off;;
+    *)
+      init_displays;;
+  esac
+}
+
+get_value() {
+  VALUE=$(printf "0\n10\n20\n30\n40\n50\n60\n70\n80\n90\n100" | dmenu -c -i -p "value to set")
+}
+
+case $CHOICE in
+  "brightness")
+    get_value
+    for monitor in $MONITORS; do
+    ddcutil -d $monitor setvcp 10 $VALUE
+    done;;
+  "contrast")
+    get_value
+    for monitor in $MONITORS; do
+    ddcutil -d $monitor setvcp 12 $VALUE
+    done;;
+  "toggle secondary display")
+    toggle;;
+esac
diff --git a/bin/espdev b/bin/espdev
new file mode 100755
index 0000000..b19b72b
--- /dev/null
+++ b/bin/espdev
@@ -0,0 +1,27 @@
+#!/bin/sh
+
+if [ $1 = "source" ]; then
+  echo "sourcing and exiting..."
+. $HOME/esp/esp-idf/export.sh
+  exit
+fi
+
+. $HOME/esp/esp-idf/export.sh
+echo "cleaning up..."
+idf.py fullclean
+echo "done cleaning."
+echo "building..."
+idf.py build
+echo "done building."
+echo "flashing..."
+idf.py -p /dev/ttyACM0 flash
+echo "done flashing."
+read -n 1 input -p "monitor serial output? [y/n]"
+if [ $input = y ]; then
+  echo "monitoring..."
+  idf.py -p /dev/ttyACM0 monitor
+else if [ $input = n ]; then
+  exit
+else
+  echo "yes or no dude..."
+fi
diff --git a/bin/gsr b/bin/gsr
new file mode 100755
index 0000000..1dc50d7
--- /dev/null
+++ b/bin/gsr
@@ -0,0 +1,24 @@
+#!/bin/sh
+GSRPID=$(pidof gpu-screen-recorder)
+DWMBLOCKSPID=$(pidof dwmblocks)
+AUDIO="-ac opus -a default_output|default_input"
+AUDIONOMIC="-ac opus -a default_output"
+VIDEO="-w DP-3 -k av1_10bit -c mkv -fm content -bm vbr"
+OUTPUT="-o $HOME/wdraidz/media/game-videos/$(date +%m-%d-%Y_%R:%S).mkv"
+
+if [ -n "$GSRPID" ]; then
+  kill -SIGINT $GSRPID
+  kill -RTMIN+2 $DWMBLOCKSPID
+  notify-send "recording saved" -i :
+  exit
+fi
+
+if [ $1 = 1 ]; then 
+  gpu-screen-recorder $VIDEO $AUDIONOMIC $OUTPUT&
+  kill -RTMIN+2 $DWMBLOCKSPID
+  notify-send "recording started with no mic" -i :
+else
+  gpu-screen-recorder $VIDEO $AUDIO $OUTPUT&
+  kill -RTMIN+2 $DWMBLOCKSPID
+  notify-send "recording started" -i :
+fi
diff --git a/bin/manager b/bin/manager
new file mode 100755
index 0000000..9801d75
--- /dev/null
+++ b/bin/manager
@@ -0,0 +1,24 @@
+#!/bin/sh
+CORE="suspend\nreboot\nhibernate\nshutdown\nkey repeat rate\nvolume mixer"
+#EXTRA="display settings\nrgb off"
+
+ACTION=$(printf "$CORE\n$EXTRA" | dmenu -c -i -l 10 -p "manager")
+
+case "$ACTION" in
+  "suspend")
+    loginctl suspend;;
+  "reboot")
+    loginctl reboot;;
+  "hibernate")
+    loginctl hibernate;;
+  "shutdown")
+    loginctl poweroff;;
+  "key repeat rate")
+    xset r rate 200 40;;
+  "volume mixer")
+    st -i -g 80x20-200+200 -e pulsemixer;;
+  "rgb off")
+    openrgb --mode direct --color 000000;;
+  "display settings")
+    displayctl;;
+esac
diff --git a/bin/mpd-monitor b/bin/mpd-monitor
new file mode 100755
index 0000000..009c984
--- /dev/null
+++ b/bin/mpd-monitor
@@ -0,0 +1,30 @@
+#!/bin/sh
+
+PID=$(pgrep -x mpc)
+if [ -n "$PID" ]; then
+  echo "another instance of mpd-monitor already running"
+  exit
+fi
+
+ID=$(mpc current -f %id% )
+mpc idleloop |
+  while read -r event; do 
+    # if a player event is not output, skip rest of loop
+    [ "$event" = "player" ] || continue
+
+    # get current id to compare to init id
+    NEW_ID=$(mpc current -f %id%)
+    # if a player event is output, but the track has not changed, skip rest of loop
+    [ "$NEW_ID" != "$ID" ] || continue
+    ID=$NEW_ID
+
+    dunstctl close-all
+    TITLE=$(mpc current -f %title%)
+    ARTIST=$(mpc current -f %artist%)
+
+    if [ -z "$TITLE" ]; then
+      notify-send "End of queue or queue empty" "or no metadata for track" -i :
+    else
+      notify-send "$TITLE" "$ARTIST" -i :
+    fi
+  done
diff --git a/bin/multi_unzip b/bin/multi_unzip
new file mode 100755
index 0000000..94ecd3f
--- /dev/null
+++ b/bin/multi_unzip
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+# unzips the contents of every present zip archive into directories of the same name
+# the % is used to remove the file extension (.zip).
+# % matches the shortest occurence from the end.
+# %% would remove all extensions (.tar.gz would be matched by %%)
+# # and ## are the corresponding operators for matching at the beginning
+
+for file in ./*.zip; do
+  dir_name=${file%.*}
+  mkdir -p "$dir_name"
+  unzip -d "$dir_name" "$file"
+done
diff --git a/bin/open b/bin/open
new file mode 100755
index 0000000..f6991e0
--- /dev/null
+++ b/bin/open
@@ -0,0 +1,8 @@
+#!/bin/sh
+FILE=$(find -maxdepth 5 -type f | dmenu -c -i -l 10 -p "path to open")
+
+if ( ./"$FILE" ); then
+  exit
+else
+  xdg-open "$FILE"
+fi
diff --git a/bin/playerctl-mon b/bin/playerctl-mon
new file mode 100755
index 0000000..9d02d80
--- /dev/null
+++ b/bin/playerctl-mon
@@ -0,0 +1,8 @@
+#!/bin/sh
+playerctl --follow metadata title |
+  while read x; do
+    dunstctl close-all
+    TITLE=$(playerctl metadata title)
+    ARTIST=$(playerctl metadata artist)
+    notify-send "$TITLE" "$ARTIST" -i :
+  done
diff --git a/bin/power_mode b/bin/power_mode
new file mode 100755
index 0000000..eade12d
--- /dev/null
+++ b/bin/power_mode
@@ -0,0 +1,11 @@
+#!/bin/sh
+CURRENT_POWER_MODE=$(powerprofilesctl get)
+CHOICE=$(printf "performance\nbalanced\npower-saver" | dmenu -c -i -l 5 -p "$CURRENT_POWER_MODE")
+case "$CHOICE" in
+  "performance")
+    powerprofilesctl set performance;;
+  "balanced")
+    powerprofilesctl set balanced;;
+  "power-saver")
+    powerprofilesctl set power-saver;;
+esac
diff --git a/bin/pull_all b/bin/pull_all
new file mode 100755
index 0000000..662d792
--- /dev/null
+++ b/bin/pull_all
@@ -0,0 +1,12 @@
+#!/bin/sh
+for repo in ./*/; do
+  (
+    cd "$repo" || exit
+    git pull
+    cd -
+  ) > /dev/null 2<&1 &
+done
+
+wait
+
+echo "done"
diff --git a/bin/record b/bin/record
new file mode 100755
index 0000000..03737ef
--- /dev/null
+++ b/bin/record
@@ -0,0 +1,50 @@
+#!/bin/sh
+
+#PID=$(pidof ffmpeg)
+#if [ -n "$PID" ]; then
+#  pkill -SIGINT ffmpeg
+#  pkill -SIGRTMIN+2 dwmblocks
+#  notify-send "recording saved" -i :
+#  exit
+#fi
+#
+#SCREEN="ffmpeg -hwaccel vaapi -hwaccel_output_format vaapi -s 3440x1440 -f x11grab -r 60 -i :0.0+0,0 "
+#SYSTEM_AUDIO="-f pulse -i alsa_output.pci-0000_00_1f.3.iec958-stereo.monitor"
+#MICROPHONE="-f pulse -i default:monitor"
+#COMPRESSION="-c:a flac -vf format=nv12,hwupload -c:v av1_vaapi"
+#FILENAME="$HOME/wdraidz/media/game-videos/$(date +%m-%d-%Y_%R:%S).mkv"
+#SIGSEND="pkill -SIGRTMIN+2 dwmblocks"
+#
+#if [ $1 = 1 ]; then
+#  $SCREEN $SYSTEM_AUDIO $COMPRESSION $FILENAME&
+#  notify-send "recording started with no mic" -i :
+#else
+#  $SCREEN $SYSTEM_AUDIO $MICROPHONE -filter_complex "[1:0][2:0]amerge=inputs=2[a]" -map 0:v -map "[a]" $COMPRESSION $FILENAME&
+#  notify-send "recording started" -i :
+#fi
+#
+#$SIGSEND
+
+# gpu-screen-recorder
+GSRPID=$(pidof gpu-screen-recorder)
+AUDIO="-ac opus -a default_output|default_input"
+AUDIONOMIC="-ac opus -a default_output"
+VIDEO="-w DisplayPort-1 -k av1 -c mkv -fm content -bm vbr"
+OUTPUT="-o $HOME/wdraidz/media/game-videos/$(date +%m-%d-%Y_%R:%S).mkv"
+
+if [ -n "$GSRPID" ]; then
+  pkill -SIGINT -f gpu-screen-recorder
+  pkill -SIGRTMIN+2 dwmblocks
+  notify-send "recording saved" -i :
+  exit
+fi
+
+if [ $1 = 1 ]; then 
+  gpu-screen-recorder $VIDEO $AUDIONOMIC $OUTPUT&
+  notify-send "recording started with no mic" -i :
+else
+  gpu-screen-recorder $VIDEO $AUDIO $OUTPUT&
+  notify-send "recording started" -i :
+fi
+
+pkill -SIGRTMIN+2 dwmblocks
diff --git a/bin/screenshot b/bin/screenshot
new file mode 100755
index 0000000..394e02c
--- /dev/null
+++ b/bin/screenshot
@@ -0,0 +1,10 @@
+#!/bin/sh
+FILENAME=$(date +%m-%d-%Y_%R:%S)
+mkdir -p ~/pictures/screenshots
+if [ $1 = 1 ]; then
+  import clipboard:
+  notify-send "Screenshot taken" "copied to clipboard" -i :
+else
+  import -window root ~/pictures/screenshots/"$FILENAME".png
+  notify-send "Screenshot taken" "saved to ~/pictures/screenshots/$FILENAME.png" -i :
+fi
diff --git a/bin/st-cpu b/bin/st-cpu
new file mode 100755
index 0000000..3d4e463
--- /dev/null
+++ b/bin/st-cpu
@@ -0,0 +1,25 @@
+#!/bin/sh
+CPUTEMP=$(sensors | grep "Package id 0" | awk '{print $4}' | sed 's/+//;s/\.0//g' )
+#CPUFREQ=$(cat /sys/devices/system/cpu/cpufreq/policy1/scaling_cur_freq)
+#
+#if [ $CPUFREQ -gt 1000000 ]; then
+#  CPUFREQ="$(echo "scale=1; $CPUFREQ / 1000000" | bc) GHz"
+#else
+#  CPUFREQ="$(echo "scale=0; $CPUFREQ / 1000" | bc) MHz"
+#fi
+
+# freebsd
+#CORETEMPS=$(sysctl dev.cpu | grep temperature | awk '{print $2}' | sed s/.[0-9]C$//g)
+#
+#CORE_COUNT=0
+#SUM=0
+#
+#for temp in $CORETEMPS; do
+#  SUM=$((SUM + temp))
+#  CORE_COUNT=$((CORE_COUNT + 1))
+#done
+#
+#
+#CPUTEMP="$((SUM / CORE_COUNT)) C"
+
+echo $CPUTEMP
diff --git a/bin/st-disk b/bin/st-disk
new file mode 100755
index 0000000..f3338ef
--- /dev/null
+++ b/bin/st-disk
@@ -0,0 +1,2 @@
+#!/bin/sh
+echo $(df / | awk 'NR==2 {print $6" "$5}')
diff --git a/bin/st-mem b/bin/st-mem
new file mode 100755
index 0000000..8e0a7df
--- /dev/null
+++ b/bin/st-mem
@@ -0,0 +1,18 @@
+#!/bin/sh
+MEMORY_USED=$(free -h | awk 'NR==2 {print $3}')
+
+# freebsd (and maybe better for linux too)
+#PAGES_WIRED=$(sysctl vm.stats.vm.v_wire_count | awk '{print $2}')
+#PAGES_ACTIVE=$(sysctl vm.stats.vm.v_active_count | awk '{print $2}')
+#PAGES_DIRTY=$(sysctl vm.stats.vm.v_laundry_count | awk '{print $2}')
+#TOTAL_PAGES=$(echo "scale=0; $PAGES_WIRED+$PAGES_ACTIVE+$PAGES_DIRTY" | bc)
+#
+#BYTES_USED=$(echo "scale=0; $TOTAL_PAGES*4096" | bc)
+#
+#if [ $BYTES_USED -ge 1073741824 ]; then
+#  MEMORY_USED="$(echo "scale=1; $BYTES_USED/1024^3" | bc) GiB"
+#else
+#  MEMORY_USED="$(echo "scale=1; $BYTES_USED/1024^2" | bc) MiB"
+#fi
+
+echo $MEMORY_USED
diff --git a/bin/st-power b/bin/st-power
new file mode 100755
index 0000000..e3fe69a
--- /dev/null
+++ b/bin/st-power
@@ -0,0 +1,54 @@
+#!/bin/sh
+
+# for UPS monitoring with NUT 
+#
+#DATA_CMD="upsc ups@localhost"
+
+# on debian and freebsd, ups.realpower is not available.
+# calculate load in watts with load percent and max output instead.
+#MAX_OUTPUT=$($DATA_CMD | grep ups.realpower.nominal: | awk '{print $2}')
+#LOAD_VALUE=$($DATA_CMD | grep ups.load: | awk '{print $2}')
+#LOAD_PERCENT=$(echo "scale=2; $LOAD_VALUE/100" | bc)
+#POWER=$(echo "scale=0; $LOAD_PERCENT*$MAX_OUTPUT" | bc)
+
+# on void, ups.realpower is available!
+#POWER="$($DATA_CMD | grep ups.realpower: | awk '{print $2}') W"
+
+# "round" to integer. just removes decimal and whatevers after. not necessary with ups.realpower.
+#POWER="${POWER%.*} W"
+#CHARGE="$($DATA_CMD | grep battery.charge: | awk '{print $2}')%"
+
+#if [ "$CHARGE" = "100%" ]; then
+#  echo $POWER
+#else
+#  echo "$CHARGE $POWER"
+#fi
+
+# for battery monitoring everywhere else
+#
+# if power_now is present, just divide it to watts.
+# (from micro watts on thinkpads, perhaps something else on other platforms)
+if test -f /sys/class/power_supply/BAT*/power_now; then
+  POWER=$(cat /sys/class/power_supply/BAT*/power_now)
+  POWER="$(echo "scale=2; $POWER/1000000" | bc)W"
+else
+# if power_now is not present, calculate it:
+  VOLTAGE=$(cat /sys/class/power_supply/BAT*/voltage_now)
+  CURRENT=$(cat /sys/class/power_supply/BAT*/current_now)
+  POWER="$(echo "scale=2; $VOLTAGE*$CURRENT/1000000000000" | bc)W"
+fi
+
+STATUS=$(cat /sys/class/power_supply/BAT*/status)
+
+#case "$STATUS" in
+#  "Charging")
+#    STATUS="+";;
+#  "Discharging")
+#    STATUS="-";;
+#  "Not Charging")
+#    STATUS="...";;
+#esac
+
+CHARGE="$(cat /sys/class/power_supply/BAT*/capacity)%"
+
+echo "$CHARGE $POWER $STATUS"
diff --git a/bin/st-rec b/bin/st-rec
new file mode 100755
index 0000000..a620002
--- /dev/null
+++ b/bin/st-rec
@@ -0,0 +1,8 @@
+#!/bin/sh
+sleep 0.5
+PID=$(pidof gpu-screen-recorder)
+if [ -n "$PID" ]; then
+  echo " REC"
+#elif [ -z "$PID" ]; then
+#  echo " - "
+fi
diff --git a/bin/st-temp b/bin/st-temp
new file mode 100755
index 0000000..20d7a01
--- /dev/null
+++ b/bin/st-temp
@@ -0,0 +1,18 @@
+#!/bin/sh
+CPUTEMP=$(sensors | grep "Package id 0" | awk '{print $4}' | sed 's/+//;s/\.0//g' )
+
+# freebsd
+#CORETEMPS=$(sysctl dev.cpu | grep temperature | awk '{print $2}' | sed s/.[0-9]C$//g)
+#
+#CORE_COUNT=0
+#SUM=0
+#
+#for temp in $CORETEMPS; do
+#  SUM=$((SUM + temp))
+#  CORE_COUNT=$((CORE_COUNT + 1))
+#done
+#
+#
+#CPUTEMP="$((SUM / CORE_COUNT)) C"
+
+echo $CPUTEMP
diff --git a/bin/st-usage b/bin/st-usage
new file mode 100755
index 0000000..c49a20f
--- /dev/null
+++ b/bin/st-usage
@@ -0,0 +1,4 @@
+#!/bin/sh
+CPU_USAGE=$(top -bn2 | grep "%Cpu(s)" | awk 'NR==2 {print 100 - $8}')
+GPU_USAGE=$(nvtop -s | grep gpu_util | awk '{print $2}' | sed 's/"//g;s/,//')
+echo "CPU:$CPU_USAGE% GPU:$GPU_USAGE" 
diff --git a/bin/st-vol b/bin/st-vol
new file mode 100755
index 0000000..970bd68
--- /dev/null
+++ b/bin/st-vol
@@ -0,0 +1,10 @@
+#!/bin/sh
+VOLUME=$(wpctl get-volume @DEFAULT_SINK@)
+#VOLUME=$(mixer | grep vol)
+case $VOLUME in
+  *MUTED*)
+    echo " MUTED";;
+esac
+#VOLUME=$(echo $VOLUME | awk '{print $3}' | sed 's/:.*//;s/^0//;s/\.//')
+VOLUME=$(echo $VOLUME | awk '{print $2}' | sed s/^0\.//g)
+echo " $VOLUME"
diff --git a/bin/sync_music b/bin/sync_music
new file mode 100755
index 0000000..11fa799
--- /dev/null
+++ b/bin/sync_music
@@ -0,0 +1,7 @@
+#!/bin/sh
+rsync -aP $HOME/wdraidz/media/music/ $HOME/music/ > $HOME/.sync_log && SUCCESS=1
+if [ $SUCCESS = 1 ]; then
+  notify-send "sync complete; logged to $HOME/.sync_log" -i :
+else
+  notify-send "sync error..." -i :
+fi
diff --git a/bin/tc b/bin/tc
new file mode 100755
index 0000000..bf013eb
--- /dev/null
+++ b/bin/tc
@@ -0,0 +1,39 @@
+#!/bin/sh
+for dir in ./*; do
+  cd "$dir"
+  mkdir -p output
+  for file in *.*; do
+  STRIPPED_NAME=${file%.*}
+
+  # CPU
+
+  ffmpeg -n -i "$file" \
+  -init_hw_device vulkan=vk:0 \
+  -c:a copy -c:v libsvtav1 -crf "$CRF" -preset "$PRESET" \
+  -svtav1-params "tune=0:lookahead=120:scm=1" \
+  output/"$STRIPPED_NAME".mkv
+
+  # -init_hw_device vulkan=vk:0
+  # platform-agnostic hardware accelerated decoding with vulkan
+  # only available for h264,h265, and experimentally av1
+
+  # parameters
+  ## temporal filtering: averages frames
+  # enable-tf=0
+  ## screen content mode: optimization for screen captures (goated?)
+  # scm=1
+
+  # 10 bit color
+  #-pix_fmt yuv420p10le \
+
+  # VAAPI
+  #ffmpeg -hwaccel vaapi -hwaccel_output_format vaapi \
+  #-i "$file" -c:a copy -c:v av1_vaapi -crf 20 -b:v 30M "output/$file"
+  #ffmpeg -hwaccel vaapi -hwaccel_output_format vaapi \
+  #-i "$file" -c:a copy -c:v av1_vaapi -rc_mode VBR -b:v 30M -maxrate 35M "output/$file"
+  # NVENC
+  #ffmpeg -i "$file" \
+  #-c:a copy -c:v hevc_nvenc -preset p7 -rc vbr -maxrate 1M output/"$file".mkv
+  done
+  cd ..
+done
diff --git a/bin/volumectl b/bin/volumectl
new file mode 100755
index 0000000..e48a228
--- /dev/null
+++ b/bin/volumectl
@@ -0,0 +1,26 @@
+#!/bin/sh
+INCREMENT="2"
+
+case $1 in
+  "up")
+    wpctl set-volume @DEFAULT_SINK@ $INCREMENT%+;;
+  "down")
+    wpctl set-volume @DEFAULT_SINK@ $INCREMENT%-;;
+  "mute")
+    wpctl set-mute @DEFAULT_SINK@ toggle;;
+esac
+
+kill -RTMIN+1 $(pidof dwmblocks)
+
+# freebsd
+#case $1 in
+#  "up")
+#    mixer vol.volume=+$INCREMENT% > /dev/null;;
+#  "down")
+#    mixer vol.volume=-$INCREMENT% > /dev/null;;
+#  "mute")
+#    mixer vol.mute=toggle > /dev/null;;
+#esac
+#
+#PID=$(pgrep dwmblocks)
+#kill -RTMIN+1 $PID