diff options
Diffstat (limited to 'i3/tungsten')
| -rw-r--r-- | i3/tungsten/i3/config | 259 | ||||
| -rwxr-xr-x | i3/tungsten/i3status/config | 64 |
2 files changed, 323 insertions, 0 deletions
diff --git a/i3/tungsten/i3/config b/i3/tungsten/i3/config new file mode 100644 index 0000000..c036263 --- /dev/null +++ b/i3/tungsten/i3/config @@ -0,0 +1,259 @@ +# i3 config file (v4) +# +# Please see https://i3wm.org/docs/userguide.html for a complete reference! +# +# This config file uses keycodes (bindsym) and was written for the QWERTY +# layout. +# +# To get a config file with the same key positions, but for your current +# layout, use the i3-config-wizard +# + +# Font for window titles. Will also be used by the bar unless a different font +# is used in the bar {} block below. +font pango:CaskaydiaCoveNerdFontMono 16 + +# This font is widely installed, provides lots of unicode glyphs, right-to-left +# text rendering and scalability on retina/hidpi displays (thanks to pango). +#font pango:DejaVu Sans Mono 8 + +# Start XDG autostart .desktop files using dex. See also +# https://wiki.archlinux.org/index.php/XDG_Autostart +exec --no-startup-id dex --autostart --environment i3 + +# The combination of xss-lock, nm-applet and pactl is a popular choice, so +# they are included here as an example. Modify as you see fit. + +# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the +# screen before suspend. Use loginctl lock-session to lock your screen. +exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork + +# NetworkManager is the most popular way to manage wireless networks on Linux, +# and nm-applet is a desktop environment-independent system tray GUI for it. +# exec --no-startup-id nm-applet + +# volume control +set $refresh_i3status killall -SIGUSR1 i3status +bindsym XF86AudioRaiseVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 1%+ && $refresh_i3status +bindsym XF86AudioLowerVolume exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 1%- && $refresh_i3status +bindsym XF86AudioMute exec --no-startup-id wpctl set-mute @DEFAULT_SINK@ toggle && $refresh_i3status + +# keyboard media controls +bindsym XF86AudioPlay exec --no-startup-id playerctl play-pause +bindsym XF86AudioPause exec --no-startup-id playerctl play-pause +bindsym XF86AudioNext exec --no-startup-id playerctl next +bindsym XF86AudioPrev exec --no-startup-id playerctl previous + +mode $mediacontrols { + bindsym h exec --no-startup-id playerctl previous + bindsym j exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%- && $refresh_i3status + bindsym k exec --no-startup-id wpctl set-volume @DEFAULT_SINK@ 5%+ && $refresh_i3status + bindsym m exec --no-startup-id wpctl set-mute @DEFAULT_SINK@ toggle && $refresh_i3status + bindsym l exec --no-startup-id playerctl next + bindsym p exec --no-startup-id playerctl play-pause + + bindsym Return mode default + bindsym Escape mode default +} + +set $mediacontrols "vim-like media controls" +bindsym Mod1+m mode $mediacontrols + +# use these keys for focus, movement, and resize directions when reaching for +# the arrows is not convenient +set $up k +set $down j +set $left h +set $right l + +# use Mouse+Mod1 to drag floating windows to their wanted position +floating_modifier Mod1 + +# move tiling windows via drag & drop by left-clicking into the title bar, +# or left-clicking anywhere into the window while holding the floating modifier. +tiling_drag modifier titlebar + +# start commonly used apps +bindsym Mod1+q exec --no-startup-id kitty +bindsym Mod1+x exec --no-startup-id xterm +bindsym Mod1+Shift+s exec --no-startup-id firefox +bindsym Mod1+Ctrl+Shift+s exec --no-startup-id spotify-launcher + +# kill focused window +bindsym Mod1+Shift+q kill + +# start dmenu (a program launcher) +bindsym Mod1+Tab exec --no-startup-id rofi -show drun +# A more modern dmenu replacement is rofi: +# bindsym Mod1+d exec "rofi -modi drun,run -show drun" +# There also is i3-dmenu-desktop which only displays applications shipping a +# .desktop file. It is a wrapper around dmenu, so you need that installed. +# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop + +# change focus +bindsym Mod1+$left focus left +bindsym Mod1+$down focus down +bindsym Mod1+$up focus up +bindsym Mod1+$right focus right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Left focus left +bindsym Mod1+Down focus down +bindsym Mod1+Up focus up +bindsym Mod1+Right focus right + +# move focused window +bindsym Mod1+Shift+$left move left +bindsym Mod1+Shift+$down move down +bindsym Mod1+Shift+$up move up +bindsym Mod1+Shift+$right move right + +# alternatively, you can use the cursor keys: +bindsym Mod1+Shift+Left move left +bindsym Mod1+Shift+Down move down +bindsym Mod1+Shift+Up move up +bindsym Mod1+Shift+Right move right + +# split in horizontal orientation +bindsym Mod1+b split h + +# split in vertical orientation +bindsym Mod1+v split v + +# enter fullscreen mode for the focused container +bindsym Mod1+f fullscreen toggle + +# change container layout (stacked, tabbed, toggle split) +bindsym Mod1+s layout stacking +bindsym Mod1+w layout tabbed +bindsym Mod1+e layout toggle split + +# toggle tiling / floating +bindsym Mod1+Shift+space floating toggle + +# change focus between tiling / floating windows +bindsym Mod1+space focus mode_toggle + +# focus the parent container +bindsym Mod1+a focus parent + +# focus the child container +#bindsym Mod1+d focus child + +# move the currently focused window to the scratchpad +bindsym Mod1+Shift+minus move scratchpad + +# Show the next scratchpad window or hide the focused scratchpad window. +# If there are multiple scratchpad windows, this command cycles through them. +bindsym Mod1+minus scratchpad show + +# Define names for default workspaces for which we configure key bindings later on. +# We use variables to avoid repeating the names in multiple places. +set $ws1 "1" +set $ws2 "2" +set $ws3 "3" +set $ws4 "4" +set $ws5 "5" +set $ws6 "6" +set $ws7 "7" +set $ws8 "8" +set $ws9 "9" +set $ws10 "10" + +# switch to workspace +bindsym Mod1+1 workspace number $ws1 +bindsym Mod1+2 workspace number $ws2 +bindsym Mod1+3 workspace number $ws3 +bindsym Mod1+4 workspace number $ws4 +bindsym Mod1+5 workspace number $ws5 +bindsym Mod1+6 workspace number $ws6 +bindsym Mod1+7 workspace number $ws7 +bindsym Mod1+8 workspace number $ws8 +bindsym Mod1+9 workspace number $ws9 +bindsym Mod1+0 workspace number $ws10 + +# move focused container to workspace +bindsym Mod1+Shift+1 move container to workspace number $ws1 +bindsym Mod1+Shift+2 move container to workspace number $ws2 +bindsym Mod1+Shift+3 move container to workspace number $ws3 +bindsym Mod1+Shift+4 move container to workspace number $ws4 +bindsym Mod1+Shift+5 move container to workspace number $ws5 +bindsym Mod1+Shift+6 move container to workspace number $ws6 +bindsym Mod1+Shift+7 move container to workspace number $ws7 +bindsym Mod1+Shift+8 move container to workspace number $ws8 +bindsym Mod1+Shift+9 move container to workspace number $ws9 +bindsym Mod1+Shift+0 move container to workspace number $ws10 + +# reload the configuration file +bindsym Mod1+Shift+c reload +# restart i3 inplace (preserves your layout/session, can be used to upgrade i3) +bindsym Mod1+Shift+r restart +# exit i3 (logs you out of your X session) +bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'" + +# resize window (you can also use the mouse for that) +mode "resize" { + # These bindings trigger as soon as you enter the resize mode + + # Pressing left will shrink the window’s width. + # Pressing right will grow the window’s width. + # Pressing up will shrink the window’s height. + # Pressing down will grow the window’s height. + bindsym $left resize shrink width 10 px or 10 ppt + bindsym $down resize grow height 10 px or 10 ppt + bindsym $up resize shrink height 10 px or 10 ppt + bindsym $right resize grow width 10 px or 10 ppt + + # same bindings, but for the arrow keys + bindsym Left resize shrink width 10 px or 10 ppt + bindsym Down resize grow height 10 px or 10 ppt + bindsym Up resize shrink height 10 px or 10 ppt + bindsym Right resize grow width 10 px or 10 ppt + + # back to normal: Enter or Escape or Mod1+r + bindsym Return mode "default" + bindsym Escape mode "default" + bindsym Mod1+r mode "default" +} + +bindsym Mod1+r mode "resize" + +# Start i3bar to display a workspace bar (plus the system information i3status +# finds out, if available) +bar { + status_command i3status + tray_output primary + position top +} + +exec --no-startup-id xsetroot -solid "#222222" +exec_always --no-startup-id xset r rate 200 35 +exec --no-startup-id redshift +exec --no-startup-id xrandr --output HDMI-0 --mode 1920x1080 --primary --rate 59.94 +bindsym Shift+s exec --no-startup-id maim ~/Pictures/"$(date)".png + +# window borders +default_border pixel 4 +#hide_edge_borders none +smart_borders on + + +set $Locker i3lock && sleep 1 + +# power controls + +set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown +mode "$mode_system" { + bindsym l exec --no-startup-id $Locker, mode "default" + bindsym e exec --no-startup-id i3-msg exit, mode "default" + bindsym s exec --no-startup-id $Locker && systemctl suspend, mode "default" + bindsym h exec --no-startup-id $Locker && systemctl hibernate, mode "default" + bindsym r exec --no-startup-id systemctl reboot, mode "default" + bindsym Shift+s exec --no-startup-id systemctl poweroff -i, mode "default" + + # back to normal: Enter or Escape + bindsym Return mode "default" + bindsym Escape mode "default" +} + +bindsym Mod1+End mode "$mode_system" diff --git a/i3/tungsten/i3status/config b/i3/tungsten/i3status/config new file mode 100755 index 0000000..a1c493e --- /dev/null +++ b/i3/tungsten/i3status/config @@ -0,0 +1,64 @@ +# i3status configuration file. +# see "man i3status" for documentation. + +# It is important that this file is edited as UTF-8. +# The following line should contain a sharp s: +# ß +# If the above line is not correctly displayed, fix your editor first! + +general { + colors = true + interval = 1 +} + +order += "volume master" +order += "ethernet _first_" +order += "ipv6" +order += "disk /home" +order += "cpu_usage" +order += "cpu_temperature package" +order += "memory" +order += "tztime local" + +volume master { + format = "vol: %volume" + format_muted = "muted (%volume)" + device = "default" +} + +ipv6 { + format_up = "%ip" + format_down = "" +} + +ethernet _first_ { + format_up = "%interface:%ip" + format_down = "IPv4: down" +} + +battery all { + format = "%percentage" +} + +disk "/home" { + format = "%avail" +} + +cpu_usage { + format = "CPU: %usage" +} + +cpu_temperature package { + format = "%degrees °C" + path = "/sys/class/hwmon/hwmon2/temp1_input" +} + +memory { + format = "%used %percentage_used" + threshold_degraded = "1G" + format_degraded = "MEMORY < %available" +} + +tztime local { + format = "%m-%d-%Y %H:%M:%S" +} |